brian_lw Posted July 31, 2013 Share Posted July 31, 2013 Scored me a nice little Epiphone EBM-5 this month. Purchased from a high end guitar store for $425 shipped from NY to CA Very Good condition. Preamp works well. No scratches or dings. None - not even the back side. Yet - the back-of-the neck shows real use (I like that) Frets are in good shape, Neck is straight. Tuning peg handles have been painted black and bridge is worn (typical) Came with Epiphone leather strap and aftermarket HSC. I'm really liking this guitar along with my Epi EB-3, Goth TB and Rock Bass.... Link to comment Share on other sites More sharing options...
corson Posted August 1, 2013 Share Posted August 1, 2013 Happy new bassday Link to comment Share on other sites More sharing options...
eggs Posted August 4, 2013 Share Posted August 4, 2013 Welcome Brian... & grats on scoring that beautiful bass A couple of forum members (RTH & kytty) have EBM5s & RTH, particularly, is VERY knowledgeable about them if you need any info Are you gonna try & get the tuners back to their original gold finish? Link to comment Share on other sites More sharing options...
brian_lw Posted August 6, 2013 Author Share Posted August 6, 2013 Welcome Brian... & grats on scoring that beautiful bass A couple of forum members (RTH & kytty) have EBM5s & RTH, particularly, is VERY knowledgeable about them if you need any info Are you gonna try & get the tuners back to their original gold finish? Thanks - I hope to find a someone who can plate the tuning knobs and bridge back to the original gold look. The only way I could source new ones was to purchase the entire tuning machine and there is no way to find a matching bridge so I'll give plating a shot. I think I paid a bit much for it but with a case and shipping - sure was more than my other $100 CL basses. Link to comment Share on other sites More sharing options...
eggs Posted August 6, 2013 Share Posted August 6, 2013 Not sure where you live Brian, but I think if you ask that 'plating' question over in our 'Lounge' I am confident that someone might be able to assist It just gets a bit quiet down here in our Bass-ment sometimes Link to comment Share on other sites More sharing options...
kytty Posted August 7, 2013 Share Posted August 7, 2013 Congratulations and Snap I too have a cherry red EMB5 #2785 Link to comment Share on other sites More sharing options...
MortallyWounded Posted May 18, 2014 Share Posted May 18, 2014 I'm pretty sure I contacted you about this bass on another forum, but just to confirm... you got that from Rumble Seat Music in Ithaca, correct? If so, I played it myself and was very interested in going back to buy it. Alas, it was gone. Now I know why! But I have my own now, a 1991 but otherwise the same thing. I will keep it for a few weeks and try gigging with it. I may part with it, if anyone is interested. You can probably find me on that other really popular bass forum with the same user name and a picture of Darth Vader's voice. I'm also on Google+ and have posted it on several other bass communities there. Link to comment Share on other sites More sharing options...
lordraptor1 Posted December 12, 2014 Share Posted December 12, 2014 Congratulations and Snap I too have a cherry red EMB5 #2785 me to and im restoring my factory circuit board little by little. Link to comment Share on other sites More sharing options...
lordraptor1 Posted December 27, 2014 Share Posted December 27, 2014 well, I replaced the 3 micro switches but the pots I ordered won't work :( and these were the closest I could find to stock so it looks like I will just have to get some cleaner and try that, problem is I hear a lot about deoxit but not which one to use, I know d100 for metal contacts and fader one for carbon and plastic traces and not really sure exactly which are on the EBM5. looks like metal fingers but the trace looks like it might actually be carbon so do I use the D100 or the fader deoxit? or should I just go with my old standby of either QD electronic cleaner and 91% rubbing alchohol?. other than the pots though I have her done and she plays but she seems a little more trebly than my Ibanez 4 string through my old peavey TKO 65 ( might just be me though). Link to comment Share on other sites More sharing options...
kytty Posted March 23, 2015 Share Posted March 23, 2015 me to and im restoring my factory circuit board little by little. Mine was destined to become a wall hanging as it was darn near impossible to keep the neck straight and true. Luckily I was pointed in the right direction and a local guy repaired it back, good as new. Link to comment Share on other sites More sharing options...
Grandpafixit Posted September 15, 2015 Share Posted September 15, 2015 Scored me a nice little Epiphone EBM-5 this month. Purchased from a high end guitar store for $425 shipped from NY to CA Very Good condition. Preamp works well. No scratches or dings. None - not even the back side. Yet - the back-of-the neck shows real use (I like that) Frets are in good shape, Neck is straight. Tuning peg handles have been painted black and bridge is worn (typical) Came with Epiphone leather strap and aftermarket HSC. I'm really liking this guitar along with my Epi EB-3, Goth TB and Rock Bass.... Congrats Brian I picked up an EBM-5 in black a few months ago at a Pawn shop in Toronto they had a $329.00 tag on it but I was able to talk the owner's daughter down to $110.00 they didn't know about the active Pups and only needed a new battery. My hardware polished up pretty good with Gibson's Vintage Reissue Restoration Kit. Link to comment Share on other sites More sharing options...
caskman Posted May 30, 2016 Share Posted May 30, 2016 Congrats Brian I picked up an EBM-5 in black a few months ago at a Pawn shop in Toronto they had a $329.00 tag on it but I was able to talk the owner's daughter down to $110.00 they didn't know about the active Pups and only needed a new battery. My hardware polished up pretty good with Gibson's Vintage Reissue Restoration Kit. Good find, because of the age I recommend replacing all the electrolytic capacitors in the pre amp, there are only 12 and it took me less than one hour and cost under £1 around $1.4 Remove the back cover and carefully examine all the electrolytic's look for any "weeping" (tiny traces of liquid) if you see any change the capacitors as soon as you can. If you find the pickup balance or hear a hissing which decays a few seconds after plugging it in thats a fairly sure sign they need replacing. I did mine and the results are amazing for such a simple quick fix. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.