cdeelstra Posted June 14, 2018 Share Posted June 14, 2018 Hello, I have a 2013 Signature T. Just went to change the strings, dress the fret board, etc.. I noticed when all the strings were off that the posts screwed into the threaded sleeves for the bridge and tailpiece in the body are loose. All 4. As in wiggling in the threaded holes. Is this a big problem? Should I shim myself (with wood matches) or bring somewhere for repair? I just said "****" and threw some strings on it, stays in tune... so im at a loss. I've asked a few locals but most have no clue.. so in other words I will not be bringing to them for repair. Any thoughts? Thanks. Link to comment Share on other sites More sharing options...
brad1 Posted June 14, 2018 Share Posted June 14, 2018 Unless they are screwed down all the way really tight; yeah they may move a little. Link to comment Share on other sites More sharing options...
Black Dog Posted June 14, 2018 Share Posted June 14, 2018 If the screws are wiggling slightly in the threaded inserts that's OK. If the stud inserts are moving in the wood, that's different. Sounds like yours is OK. Link to comment Share on other sites More sharing options...
cdeelstra Posted June 19, 2018 Author Share Posted June 19, 2018 If the screws are wiggling slightly in the threaded inserts that's OK. If the stud inserts are moving in the wood, that's different. Sounds like yours is OK. Thanks for the reply, it freaked me out for sure.. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.