Jump to content
Gibson Brands Forums

Casino tone & volume pots value upgrade


g6120

Recommended Posts

Hello Folks

 

Thinking about upgrading my tone & volume pots on my Inspired Casino .

 

What value do I need for both and also will my current knobs fit the new pots .

 

What is the value of the caps currently in this guitar .

 

Im replacing my input and toggle switch with switchcraft and also going to replace plastic wire with cloth .

 

Your thoughts are appreciated

Link to comment
Share on other sites

My personal experience is that, if doing so specifically as an upgrade to enhance tone, it will yield absolutely nothing. Your guitar will sound exactly the same afterwards. That said, if doing so because one or more of the pots are getting scratchy, replacement will end the scratchiness, and high-quality pots (like CTS) will last a lot longer than many stock Epi pots. Same for doing it as a preventative measure. In my case, pots were getting scratchy after only about 3 years of light use. All has been stable with CTS pots ever since (4+ years).

 

Epi often uses 500k audio taper for tone, 300k linear for volume, and .022uf tone caps. From what I can tell, many folks upgrade their Epis (as I did) with all 500k audio taper pots. I don't think caps are anywhere as big a deal as some assert - aside from value, a cap is a cap.

Link to comment
Share on other sites

You say "better parts" - is there something wrong with the ones that are in there now, and/or have you identified what's in there now? Cap values of .047 are typical for Fender-type single-coil pickups - there's some erroneous info out there that because Casinos have single-coil pickups (P90s), they use the same caps as Fender. That is not the case; Gibson/Epiphone uses the same components on P90s as with Humbuckers.

Link to comment
Share on other sites

Number one I don't like plastic wire cloth is my preference and better parts yes upgrade as my toggle switch is faulty so a switchcraft will be my replacement and since Im in I will also replace in input jack . As far as the other things Ive mentioned well thats up in the air at the moment . Im not after tone change Im after reliability endurance so if Im on stage or recording the certainty of failure is less .

 

 

 

.............................................................

 

http://www.youtube.com/watch?v=iBB2o5ejb-U

Link to comment
Share on other sites

Thats good to know about the input jack being switchcraft . Will not change the tone pots or the caps but may change to cloth wire .

 

Just found this

 

Switchcraft™ toggle switch ensures life long security found that statement on Epiphone site but mine is faulty and looking into the guitar I don't see the Switchcraft name so I'm skeptical .

 

 

 

Thanks

Link to comment
Share on other sites

I say, if it ain't broke, don't fix it. On a low-current circuit, like an electric guitar, the type of wire means zip.

 

 

 

Im all school I prefer not looking at plastic wiring just knowing its there displeases me . Will it make a sonic difference no I reolize that its just my personal preference .

Link to comment
Share on other sites

Im all school I prefer not looking at plastic wiring just knowing its there displeases me . Will it make a sonic difference no I reolize that its just my personal preference .

That's all good and well, but messing around needlessly often causes situations like this: http://forum.gibson.com/index.php?/topic/55016-epiphone-riviera-p93-custom-wiring/

 

BTW, I believe the term is "old school"

Link to comment
Share on other sites

That's all good and well, but messing around needlessly often causes situations like this: http://forum.gibson....-custom-wiring/

 

BTW, I believe the term is "old school"

 

I don't believe there is anything wrong thinking out of the box and some feel safe there which is fine .

 

New ideas can be a risk yes but experimenting can be innovative to a individual and take you where you never thought possible which is a very good thing and a learning experience .

 

What would this world be like today in general if folks didn't take chances and think out of the box .

Link to comment
Share on other sites

  • 5 years later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...