sellen Posted May 31, 2014 Share Posted May 31, 2014 Gibson SG Traditional 2014 EB, mahogany body, mahogany neck (50s Profile), rosewood fretboard, 22 frets, 62.8cm scale, 2 x 57 Classic humbucker, 2x volume and 2x tone control, Tone Pro Kluson... A shame it does not have the same beveling as the standard Link to comment Share on other sites More sharing options...
capmaster Posted May 31, 2014 Share Posted May 31, 2014 Gibson SG Traditional 2014 EB, mahogany body, mahogany neck (50s Profile), rosewood fretboard, 22 frets, 62.8cm scale, 2 x 57 Classic humbucker, 2x volume and 2x tone control, Tone Pro Kluson... A shame it does not have the same beveling as the standard Perhaps they leave more wood to the body since the fatter 50's neck profile promotes neck heaviness? Link to comment Share on other sites More sharing options...
charlie brown Posted May 31, 2014 Share Posted May 31, 2014 Gibson SG Traditional 2014 EB, mahogany body, mahogany neck (50s Profile), rosewood fretboard, 22 frets, 62.8cm scale, 2 x 57 Classic humbucker, 2x volume and 2x tone control, Tone Pro Kluson... A shame it does not have the same beveling as the standard Are the horns still tapered, at least?! :unsure: I don't understand them building different body spec's, after returning to the original spec's, FINALLY! ??? Unless it's a specific era model they should standardize, the beveling and horn tapering to the early '60's (Original) version. IMHO!! LOL They did change the bevel on the lower horn, slightly, in about '66??, or thereabouts, when they went to the "Batwing" pickguard. BUT, the other bevels were still quite decent, and the horns were still tapered, at that point. CB Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.