Jump to content
Gibson Brands Forums

how do i remove valve jr chasis


Recommended Posts

Firstly, remove the rear panel by taking out the six screws. On the cab top there are 4 plastic caps, gently prise them up and put them somewhere safe so you don't lose them. You will see some quite hefty screws inside, undo them and the chassis should just slide out. Be careful not to break the valves when you put it down.

That's how it is for the combo anyway.

Cheers,

Ian.

Link to comment
Share on other sites

can't miss the caps, on the top of cab. (combo or head doesn't matter)

you may find the glue a litte sticky after you remove the back cover and the 4 screws under the caps.

Careful not to tear the tolex with your screw driver but once the screws are out, that's it

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...