Guest icantbuyafender Posted March 10, 2009 Share Posted March 10, 2009 do Les Paul PG's fit on a dot studio? Link to comment Share on other sites More sharing options...
TWANG Posted March 10, 2009 Share Posted March 10, 2009 There's no reason you can't get one that does. I build pickguards and often epi players choose gibson styles for their guitars. it's just a question of the pickup spacing, the bracket length, and the neck screw hole placement. So, to choose a stock gibby guard would have likely problems. You can get one made if you like that look! somewhere.. *S* TWANG Link to comment Share on other sites More sharing options...
generation zero Posted March 10, 2009 Share Posted March 10, 2009 I know they fit on a G310, my buddy put one on his, it actually looked pretty cool. Don't know about the dot, though. Link to comment Share on other sites More sharing options...
Guest icantbuyafender Posted March 10, 2009 Share Posted March 10, 2009 yeah im not down to spend 40-50 bucks on a dot PG on ebay so im gonna end up puting a 'paul PG on it. me and my dremmel will work to make it fit... i just needa know if the bracket size is the same........ Link to comment Share on other sites More sharing options...
Guest icantbuyafender Posted March 10, 2009 Share Posted March 10, 2009 hey twang ima PM you.... i need a pickguard made.... Link to comment Share on other sites More sharing options...
TWANG Posted March 10, 2009 Share Posted March 10, 2009 okey dokey. I've got a dot studio here... and an epi lp which has a gibson guard on it.. So I can check the fit.. should have thought of that! TWANG Link to comment Share on other sites More sharing options...
generation zero Posted March 10, 2009 Share Posted March 10, 2009 I thought Gibson guards wouldn't fit epi Pauls? Did you have to modify it? Oh, and when I said G310, I meant the cheaper bolt on epi SG model that comes with no pickguard, it might be a different model number. Just to clarify. Link to comment Share on other sites More sharing options...
TWANG Posted March 10, 2009 Share Posted March 10, 2009 Epis sometimes don't match up perfectly even on the same model.. screw hole at the neck can vary, for instance. and now and then the pickups aren't spaced exactly the same. gibson uses different sized mounting rings.. so that depth and width can be different. Gibsons, 335s, have the switch in a slightly more rearward position.. so a long 335 guard on an epi requires shaping so the switch isn't too close to the guard. And other stuff. I work off a trace.. and/or measurements.. it's the only way to be sure. the gibson lp guard on my epi lp fit fine.. just a tick loose for my taste.. but ok! TWANG Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.