autodex Posted October 9, 2010 Share Posted October 9, 2010 Hello, What is the best way to clean out the dust in a semi hollow (335) Link to comment Share on other sites More sharing options...
G McBride Posted October 9, 2010 Share Posted October 9, 2010 Compressed air in a can. Link to comment Share on other sites More sharing options...
Mark Posted October 12, 2010 Share Posted October 12, 2010 I think I would only use an air compressor, The canned stuff is ice cold Link to comment Share on other sites More sharing options...
vincentw Posted October 12, 2010 Share Posted October 12, 2010 why is this necessary? i'm not sure I would spend the time doing trying to figure that one out, as it's not going to change the playability or tone of the guitar. Link to comment Share on other sites More sharing options...
kaicho8888 Posted October 14, 2010 Share Posted October 14, 2010 Hmmm...I don't remember ever cleaning mine...always looked clean. I found a pick once. I guess it helps keeping them in cases. I've just stuck my finger in there and pulled a little lint...no big deal. Link to comment Share on other sites More sharing options...
Bob R Posted October 14, 2010 Share Posted October 14, 2010 If you really must dust. A quick blow with compressed air to loosen the dust and then CAREFULLY hold a vacuum cleaner nozzle to one of the holes and suck away. No need to stick the nozzle in very far, or at all. Use your hand as an adaptor to protect the finish. The dust bunnies will magically disappear in 30 seconds or so. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.