Jump to content
Gibson Brands Forums

duane v

Moderators
  • Posts

    7,644
  • Joined

  • Days Won

    25

Posts posted by duane v

  1. Funny you bring this up but I went through a month stretch where I I wore a wrist brace on my right hand for a month and had to stop playing bass for about two weeks.

    I explained to the doctor I had started playing bass left handed back in April and had been practicing 2 hours a day at least. Basically he prescribed a brace and a weeks worth of physical therapy and now I'm fine. Turned out it was a hypertension of the tendon. 

    • Like 1
  2. 25 minutes ago, Rabs said:

    If you live in the right climate or have a temperature controlled spray area...  🙂   If I want to spray nitro I literally have to wait for the right time of the year (or pay for a booth somewhere).

    Actually I have sprayed nitro in 60-80 degrees F but I make sure the RH humidity is below 45% .

  3. I laid four coats of the butterscotch to get some coverage on the patch and the dark brown on the cutouts and the top so that the red would would pop. So far I'm presently surprised how well it covered the patch. Gonna let dry for about a week then a couple more coats of butterscotch on the cutaways then I'll address the back... then it's the whole thing with a couple of coats of vintage amber..... then I'll do the sunburst effect.

    FullSizeRender_8HNs4xtHvHpBjXt394pewA.jp

    IMG_2833.JPG

    • Like 2
  4. 1 hour ago, Karloff said:

    wow, 7 years ... that's a lot better than I usually get. it's always the fans that die on my. late last year I wound up installing a replacement fan rather than buying a new unit. so far so good

    Man

    I should had posted something, because it was the fan that stopped working. I'm gonna get it from the garbage area and buy a new fan and use it in our bedroom, as we have sinus issues.

  5. On 2/16/2023 at 7:28 AM, Whitefang said:

    Where you been?

    We've been breathing air with chemicals and other filth since the dawn of the industrial revolution.  And drinking water with all kinds of phosphates and dioxins too.  And now the chlorine used to clean that up isn't doing us much good either.  And it's not just the harm it's been doing to us, but to the planet as well.

    But I'm with you on the case of East Palestine, Ohio.  The idiot who approved of shipping those chemicals on a railroad line that goes through or near any residential area should not only live out his life in prison, but inter his body in a prison mausoleum upon death.

    Whitefang

    What's interesting with all the things we currently do to planet, human life expectancy is longer than any other time humans have been walking the earth. For example if you go back 4000-5000 years humans average life span was 30-40 years, and I'm sure there were very few man made toxins spit into the atmosphere. 

    I know we all want to complain about everything, but we all buy / use products that have harmful chemicals, eat foods we know aren't healthy for us and we still manage to live for 70 years on the average. So there's going to be a trade off for a life of comfort that contributes to a longer life span.

    Ya train accidents are unfortunate and it's even more unfortunate people are affected by these types of accidents. Let's hope it all gets cleaned up. 

    • Like 1
  6. So I am just about ready to spray the nitro sanding sealer and will probably go with 6 coats. Just a few small details to go over. And final sanding.

    I had to go in a different direction regarding the nut. As I was shaping / leveling the bottom part of the nut, the NuGlu backing soda concoction I made is a bit crumbly so I filed it off and added epoxy to the area of the bass where the nut sits to give the nut a little more height so when it comes time to cut the grooves it will be ready to go. 

    I also plugged the jack hole and drilled another.

    One other thing I noticed about Paul's bass is the the 21st fret doesn't have a fret marker, so I ordered some rosewood fret markers to eliminate it, and I also noticed  from the 15th fret and down the fret marker dots are bigger so I ordered 8 mm acrylic fret markers. 

    I still need to trim down the the stencils a little but I have plenty of time for that.

    IMG_2737.JPG

     

    IMG_2739.JPG

    FullSizeRender_3JEydg3RRipvSHVxP6DYDt.jp

    IMG_2746.JPG

     

    IMG_2748.JPG

    FullSizeRender_miNWqshQq74ArkxtuWMm6Y.jp

    FullSizeRender_thPwppc5U2cDqEeDMyvqii.jp

     

     

     

     

     

  7. 1 hour ago, Dub-T-123 said:

    If I were to try to be helpful and not just annoying my suggestion would be to make a rectangular template that eats up the two screw holes so you can just knock out that bit of work in one go. Then make a patch that first completely tightly with no gaps.

     

    Even with a perfect fitting patch you will never get rid of the lines under the lacquer. As you have it now it’s going to be really ugly 

    Here is the Gibson classical I fixed;

    You can see a few small witness lines and a little color mismatch in some area on the lower corner where the plate was. Overall for my first time doing this it came out pretty good. Did it hide everything? No.... But I didn't expect it to. 

    The only area I wished had came out better is when I sprayed the clear I covered too large of the area, as you can see it's darker than the rest of the top

    77EB63F4-E7E7-45CD-BDDF-BADD91EA0271_zps

     

  8. Another update in the works is the nut.

    After removing the nut and positioning it to be for a lefty, the nut was cut in a way where there was a slope so the low E and A slots are slightly below the zero fret. I have the nut in a little jig to add additional height to the nut by using Nuglu and baking soda then I'll sand and reshape. Then I can re-groove the nut slots so that the groove is angled downward towards the tuners.

     

  9. I didn't want to add to the size of the cavity on the bass guitar, the two screw holes I can hide by making them to look like grain spots, plus most of that will be masked by the the semi transparent lacquer.

    I don't expect to completely hide the witness lines but they will be hidden enough to where I will be happy. I have done this kind of repair on a Gibson classical guitar that had a hole cut out for a volume plate and the results (to the untrained eye) were almost invisible. 

  10. So I was able to cut out a piece of wood and run the wood grain in the same direction of the grain on the bass body. Then I dampened the wood with warm water and shaped the wood to match the top curvature. I left the patch edges slightly above the body surface so that when I add the QuikWood Putty Stick to the gaps, I will then sand the patch to blend with the top so that I can eliminate the witness lines as much as possible when I paint the bass. I purchased a combination of butterscotch blonde - Semi-Transparent nitro lacquer and then feather it towards the middle of the guitar with the vintage amber transparent lacquer. Then I'll do the body edges with the black and cherry lacquers. 

    IMG_2732.JPG

     

     

  11. I'm also finishing up a les paul project for my wifes sons birthday that's coming up. I purchased a 2nd Gibson body with a big knot on the cap.... Drilled all the holes and cavities myself without a template and carved a neck pocket for an off brand explorer neck,,,, Did a root beer burst .... It looks pretty good... All that's left is a setup. So its half Gibson and half something else... lol 

    I did the colors with water base shoe dye.

  12. On 2/10/2023 at 7:04 AM, Dub-T-123 said:

    How are you planning on replacing the fretboard binding without removing the frets? Also keep in mind if you’re planning on using rattle cans they are going to be very impractical for spraying a burst

    The fretboard binding can be removed and replaced without removing the frets.

    I don't see the impracticability spraying a burst with rattle cans as long as you make stencils and raise them off the body and neck 2-3 inches. 

  13. 3 minutes ago, Rabs said:

    No worries...  From what he says on the web site, one of the main things (as with most finishing) is to get the surface as flat as possible.

    I scuff-sanded the black using 800 grit paper and filled any dings using car body filler. I then primed (my White Primer) and sanded smooth repeatedly until the surface was 100% blemish-free.

    Next step was to spray a few coats of Shell Pink until the colour was uniform and opaque

    Which is why on the clear coat I put 12..... Gives me wiggle room so that I don't sand through the clear. 

    • Like 1
  14. 6 minutes ago, Rabs said:

    Actually I just did a quick search on another forum im on. A UK one called The Fretboard.

    He actually answered in a thread that yes, he has done it before and it worked. And he put a link to his site where he shows the a guitar he did it on

    https://manchesterguitartech.co.uk/2011/04/11/shell-pink-stratocaster-refinish/

     

    In his post he says 

    Yes I painted this over the original black finish 
    I keyed it with 800 grit paper, then primer, colour and clear coat.

     

    So there you go from someone who has done it.. Apparently it will work.

    Id still strip it  🙂 

    AHHH Thanks !!!!!

    And by luck I have one full can of clear cellulous sanding sealer I never used. 

    Thanks for finding the info. 

×
×
  • Create New...