Nad Posted January 7, 2014 Share Posted January 7, 2014 The neck pickup on my 62 reissue Sheraton has stopped working. No warning, just silence. In the middle position there is no sound with the neck volume on 10, but roll the volume back to 8 and the bridge pickup comes through. The volume reaches it's peak with the neck vol on about 5, then starts to diminish as the vol is rolled off further. no sound at around 1. (it is only the bridge pickup producing sound.) I'm about to start investigating but thought I'd see if anyone had experienced similar issues. Link to comment Share on other sites More sharing options...
Bender 4 Life Posted January 8, 2014 Share Posted January 8, 2014 mine's not done anything like that...... what happens in the middle position w/the bridge p'up just cracked open to maybe "1" and the neck p'up full on? Link to comment Share on other sites More sharing options...
charlie brown Posted January 8, 2014 Share Posted January 8, 2014 I had a similar issue, with one of my Gibson LP Double Cuts. It was "dust," on the contacts of the selector switch. Used some contact cleaner, and all was well. At worst, it could be a bad switch (I've had those, too). Or, possibly, a loose wire. CB Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.