Richie321 Posted October 20, 2015 Share Posted October 20, 2015 hi guys i changed the trust rod cover on my headstock of my epiphone but not ive desided to put it back but i now have a screw hole showing. is there anyway to fix this ?? Link to comment Share on other sites More sharing options...
el capitan Posted October 20, 2015 Share Posted October 20, 2015 Glue a cocktail stick or toothpick in the hole,Cut excess of with a Stanley knife. Refinish depending on the finish that's showing. Link to comment Share on other sites More sharing options...
Richie321 Posted October 20, 2015 Author Share Posted October 20, 2015 Glue a cocktail stick or toothpick in the hole,Cut excess of with a Stanley knife. Refinish depending on the finish that's showing. hi there thanks but were do i get the finish from? its black colour its for the Ej160e john lennon Link to comment Share on other sites More sharing options...
'Scales Posted October 21, 2015 Share Posted October 21, 2015 the fingernails of a Goth. Link to comment Share on other sites More sharing options...
Richie321 Posted October 21, 2015 Author Share Posted October 21, 2015 if i did like you say and filled the hole with cocktail stick or a match stick i thought of paiting it with nail polish black.let that dry then go over that with super glue.once thats dry use 1200 grit sand paper to smooth it down .would that fix it??? Link to comment Share on other sites More sharing options...
dhanners623 Posted October 21, 2015 Share Posted October 21, 2015 Although the screw hole you're talking about is smaller, the concept and techniques involved are the same, so here's this: http://frets.com/FretsPages/Luthier/Technique/Finish/FillStrapButtonHole/fillscrewhole.html Link to comment Share on other sites More sharing options...
Richie321 Posted October 21, 2015 Author Share Posted October 21, 2015 thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.