greenafro33 Posted May 18, 2008 Share Posted May 18, 2008 hey everyone.today i was cleaning my guitar.I started cleaning the pickups and noticed that i could move them by hand, and push the around. Is this normal, or should i get it fixed?Thanx a tons Link to comment Share on other sites More sharing options...
evol04gt Posted May 18, 2008 Share Posted May 18, 2008 they will probably teeter a little bit using the screw points like a fulcrum.... Link to comment Share on other sites More sharing options...
Biff Posted May 18, 2008 Share Posted May 18, 2008 Unless they fall out when you turn the guitar upside down, it's okay. Link to comment Share on other sites More sharing options...
TWANG Posted May 19, 2008 Share Posted May 19, 2008 they are only held by the height adjustment screws. so .. two points. long shaft.. springs between the mounting ring and base.. yep they'll move a bit! not a problem unless they are so loose they rattle, which isn't often. sometimes they aren't quite level.. you know.. flat on top.. and you can put a bit of foam underneath.. to keep them flat, so long as it's not too thick.. and that helps stabilze them a bit, too. But it's not necessary unless they are angled really crappy or wiggle when you play! Link to comment Share on other sites More sharing options...
5er driver Posted May 20, 2008 Share Posted May 20, 2008 They're supposed to move like that. That's what generates the spacial 3D tonal characteristics. Really, as long as they don't rattle, they're OK. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.