StrYk3D Posted September 5, 2010 Share Posted September 5, 2010 So this is the problem.. when i press on the top and the back my pickups move down and upwards O.O Is this normal? Please reply Im worried :unsure: Link to comment Share on other sites More sharing options...
Sjael Posted September 5, 2010 Share Posted September 5, 2010 You can relax; it's perfectly normal! The pickups 'balance' on 2 height screws that ensure they will work in just about any guitar with standard humbuckers, so they will move if you give them a push. As long as they sit more-or-less parallel to the strings, you're golden. Link to comment Share on other sites More sharing options...
animalfarm Posted September 5, 2010 Share Posted September 5, 2010 You can relax; it's perfectly normal! The pickups 'balance' on 2 height screws that ensure they will work in just about any guitar with standard humbuckers, so they will move if you give them a push. As long as they sit more-or-less parallel to the strings, you're golden. Izzzz True. There are also springs that the adjustment screws go thru, this allows the pups to re-center themselves. Some springs are the same diameter from one end to the other, Other springs have a Large end and a smaller end. The Large end of those would go over the round "tabs" directly on the underside of your pup mounting ring, keeps the pup centered. I'll post a pic of the pups/springs in one of my gits. I had reversed the springs as an experiment, but went back and put them on as described above... Note the 490R has the "Big" end of the spring visible, I reversed 'em as it SHOULD normally be after taking this shot. Link to comment Share on other sites More sharing options...
Gordy01 Posted September 6, 2010 Share Posted September 6, 2010 Animal you're getting quite good with the camera. Way to go. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.