davefeinstein Posted May 27, 2011 Share Posted May 27, 2011 I just restrung my 2005 200ce and was trying to adjust the truss rod. If I move the adjustment bolt in either direction, it springs back to the original position. Anyone ever have this issue? Any help would be appreciated. Link to comment Share on other sites More sharing options...
james_edward Posted May 28, 2011 Share Posted May 28, 2011 I just restrung my 2005 200ce and was trying to adjust the truss rod. If I move the adjustment bolt in either direction, it springs back to the original position. Anyone ever have this issue? Any help would be appreciated. Sounds like the nut is seized on the end of the rod and you're just flexing the rod when you turn the nut. I'd be trying to free the nut from the rod, drop some oil on the end of the nut perhaps Link to comment Share on other sites More sharing options...
meanstreak Posted June 5, 2011 Share Posted June 5, 2011 ya a drop of oil might help, but be careful you can do some real damage if you don't know what you're doing! Link to comment Share on other sites More sharing options...
StijnV Posted June 6, 2011 Share Posted June 6, 2011 ya a drop of oil might help, but be careful you can do some real damage if you don't know what you're doing! Exactly; you can also contact one of our authorized repair centers. Don't hesitate to send us an email to know if we have one in your country: service.europe@gibson.com or at service@gibson.com Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.