Jump to content
Gibson Brands Forums

Pesh

All Access
  • Posts

    2,114
  • Joined

  • Last visited

Reputation

14 Neutral

About Pesh

  • Birthday 05/08/1988

Profile Information

  • Gender
    Male
  • Location
    Barcelona, Spain

Contact Methods

  • Skype
    tmfisher88
  1. Pesh

    CS 336

    Some absolutely gorgeous things on this thread! Same dimensions as a 339, if you've seen one of those. The difference is the construction method.
  2. Pesh

    HP635W

    Saw one at the Guitar Show we had in Birmingham back in February, but I didn't linger around it for long. Only one I've seen of the HP's so far.
  3. Haven't been able to get on for a while - good to be posting again!

  4. I've had this on my 2013 Traditional Pro II, which came with the pick guard installed at the factory. There is no checking around the dent, it's like a small impression from the nut. I decided to keep the guard on, seeing as the holes were already drilled. To prevent further impressions being made, and to protect the area that had already been marked; I cut the end of a rubber pencil eraser off and wedged it between the nut and the body, so even if something pressed the guard down towards the body the nut won't make contact with the finish.
  5. +1 to badbluesplayer; I had the same issue with my '13, where the bridge volume just wouldn't catch so was constantly engaged / up / out. I bought a replacement and had it fitted and it was fine. I believe that the Traditional Pro II was designed so that it should be wired to fully split the coils and read from only one coil, not like the wiring in a Standard, which I believe 'taps' the coil, meaning you get about 1.5 coils worth. Someone please correct me if I'm off the mark.
  6. "All Along the Watchtower" - Jimi Hendrix.
  7. Simple one with "Wheels", by Foo Fighters
  8. I went all healthy since finding my blender again (haven't seen it since moving recently...) Smoothie made of banana, mango, passionfruit, apple, grape, blueberry, apricot and yoghurt. Completely ruined it all by having a Krispy Kreme doughnut shortly after...
  9. I've Got All This Ringing in My Ears and None on My Fingers - Fall Out Boy. ...should have lots of choices from that one
  10. OK; I've got a follow-up question (and I do apologise if I've managed to gloss over it completely where it's mentioned in this post). If you've got an Epi with vintage / Kluson / Gibson deluxe tuners, basically ones that look like this: When they are of this particular styling; are the measurements the same brand to brand? So if I have an Epi with this style and I want to put the Gotoh equivalent; will there be any alignment issues? Noob question, I know.
  11. I've was very much of the same thoughts on the 'bird; too bright and not a lot of resonance coming across; such a stark difference to the full Gibson, which sounded wonderful. The two J's sounded quite on par to my ears.
  12. That's a fierce looking 'burst! Nice.
×
×
  • Create New...