Jump to content
Gibson Brands Forums


All Access
  • Content Count

  • Joined

  • Last visited

Community Reputation

17 Neutral

About Aoresteen

  • Rank
    Advanced Member

Profile Information

  • Gender
  • Location
    Newnan GA

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. IMHO the best way to wire 3 pickups is with a Fender 5-way knife (blade) switch and a push/pull (or mini-toggle) switch to turn on the neck pickup. The 5-way allows bridge, bridge/middle, middle, middle/neck, and neck but not bridge/neck or all three. With the p/p you can force the neck pickup on. This allows you to set the 5-way to position 1 putting the bridge pickup on and the pull up the p/p switch to turn on the neck. Put the 5-way to position 2 that turns on the bridge & middle and pull up the p/p and now all 3 pickups are on. This is known as 7-way switching or the David Gilmour
  2. Here's my EB-3 short scale made from an EB-O:
  3. I've always wanted a Gibson EB-3 short scale bass like Jack Bruce played with Cream but they have always have been out of my price range. Last year I found an Epiphone EB-O short scale bass on eBay and discovered that Epiphone did make an EB-3 bass. The problem is that the Epiphone EB-3 is really an EB-3(L) long scale bass. So I bought the cherry Epi EB-O short scale and decided to mod it. I replaced the Epi pickup with the DiMarzio mudbucker Model One. Schaller Strap locks were installed. The stock Epi bridge didn't appeal to me so I installed a Hipshopt SuperT
  4. I was fortunate to have a couple of original S-300/S-310 pick guards on hand and I sent one to Pickguardian to use as a template. The new one they made fits perfectly.
  5. As far as I know Terry had only one Telecaster. If it is the same color then it is his pre-mods.
  6. A few years back I bought an Epiphone S-310 Custom. It had Fender noiseless pickups in it. http://forum.gibson.com/index.php?/topic/100080-ngd-epiphone-1994-s-310-custom/ I never did anything with the 310 Custom and it just sat. Last summer I started thinning the herd so I was going to sell it. The pick guard didn't look right so I dug deeper and pulled the pick guard and found a mess! The prior owned had hacked up the inside to get the Fender noiseless pickups to fit. No way could I sell it in this condition :( . The ash wood had also cracked at the bridge pivot studs.
  7. I gave up waiting on Epiphone to release a DC 24 fret guitar. I bought a Hamer Stellar II: I put in a set of Seymour Duncan Pearly Gates Alnico 2s in her & had my tech install a bone nut. I also have a Hamer XT DC Goldtop with mini humbuckers: The Epiphones look great but I prefer one vol, one tone like the Stellar II has.
  8. Picked up the 6832 yesterday afternoon. All is well!!!!!!! The guitar is fixed and plays wonderfully. The action is a bit lower than before - right where I like it. Intonation is dead on. Another fantastic repair by Tom Dodson. This 6832 has at least another 10 years in her.
  9. Great news! Tom texted me and my 6832 is all fixed!!! I will try to get it tomorrow or Friday.
  10. Well, disaster!!!!!!!!!!!! Around Oct 12th, a few days before leaving on an overseas trip, I noticed that the action on my 6832 was way high and the strings were detuned. Something had popped. Ugh! I further loosened the 6832's strings and put it in the case until I returned. Yesterday I drove to Jackson GA and dropped the guitar off at Tom Dodson's shop. Tom sent me a few photos today and it is not good. The neck block has a huge crack in it. Since it's a 1971ish guitar, it is 49 years old and this is a known problem area. Not sure exactly what caused the wood
  11. Welcome to the Epiphone World! That is a very nice guitar. Can you measure the diameter of the part you need with a digital caliper? I'll look in my parts bin but I need a size to look for. Also the Del Rey does NOT have "coil taps". It has "coil splits". A coil tap has multiple leads off a single coil to shorten the length of the coil hence that changes it's DC resistance and tone. You see coil taps most often in power transformers that have multiple different voltages coming out a coil. A "coil split" grounds out one full coil of a humbucker leaving a single coil to make the ton
  12. The Epiphone EB-3 is a long scale bass (34"). The original Gibson EB-3 was a short scale (30.5"). Gibson did offer a long scaled EB-3 in the 60's & 70's and it's model name is EB-3L. Why Epiphone calls their long scale copy of the EB-3L an EB-3 is beyond me. I always call it an EB-3L. Jack Bruced played an EB-3 - SHORT SCALE.
  13. Well, I recently bought an Epiphone EB-0 SS bass and I am modding the heck out of it. I have replaced the neck pickup with a DiMarzio Model One DP120 (I had to mod the pick guard to make things fit). The bridge is a piece of junk IMHO so I bought a very nice HIPSHOT 3 point bridge for it. Next up is an Artec mini-bucker for the bridge pickup. One it's done it should sound like an Gibson EB-3. The Epiphone EB-3 is a LS and the model name should be EB-3L. Mine will be a SS EB-3. Controls will be two Vol pots one Tone pot. I will move the output jack to the side to make a clean set
  14. Very nice. May I ask what you had to pay to bring this beauty home? Did it come with a case? And how did your dealer get a hold of it? Thanks!
  15. The 1971-1979ish FT guitars with bolt-on necks all suffered from neck blocks that come loose over time. That causes the neck to pull up and makes them hard to play. I thought that the FT-565 had a set neck - are you sure of the model? I have a number of these guitars - a 6832 & FT-135, an FT-165 12 string, and an FT 6732. All have been restored by Tom Dodson in Jackson GA. I had the adjustable bridges replace with traditional bone saddles, Fishman electronics installed, and all the neck blocks re-glued. Most of them had top braces that needed re-gluing as well. The cost to rep
  • Create New...