Monkey Lord Posted January 31, 2016 Posted January 31, 2016 Before I go and do something unnecessary I thought I would ask all of you whether or not the FT-79 Inspired by Texan come with a Bone Nut. If it does then I'll just leave it alone; if not I'm going to replace it with a bone nut. To look at it, it seems like bone but I'm no expert. It could be tusq of something like that. If so I still want to replace it.
Dodger11 Posted January 31, 2016 Posted January 31, 2016 Hi mate - I think both the Texan and older EJ160Es come with imitation bone nut and bridge - apparently some luthiers think it's very close to the real thing and close enough to leave in the guitar.
Monkey Lord Posted January 31, 2016 Author Posted January 31, 2016 Hi mate - I think both the Texan and older EJ160Es come with imitation bone nut and bridge - apparently some luthiers think it's very close to the real thing and close enough to leave in the guitar. OK thanks. Looks like I need to replace it.
dhanners623 Posted January 31, 2016 Posted January 31, 2016 My guess is it is imitation. The specs on the Epiphone website list the nut for the Limited Edition EJ-160E as bone, so since the specs for the IB'64 Texan are silent on the bone material, I'm thinking it is imitation. Regardless of the material, it is a good idea to take the guitar to a repairman anyway to make sure the nut and saddle are working in harmony, no pun intended....
Leonard McCoy Posted January 31, 2016 Posted January 31, 2016 My luthier filed down the nut of my lefty Inspired by Texan (2014) quite a bit, as it was getting replaced anyway, to find out what material it was made of and why the nut slots were incorrectly carved height-wise. Long story short, when filing the nut down it smelled like bone to him and to me as well. Probably synthetic bone, I wager; same goes for the saddle.
cliffenstein Posted January 31, 2016 Posted January 31, 2016 The Texan I had was made in Indonesia at the beginning of 2014 and I bought it brand new from my local guitar center. I was going to replace the nut, but my luthier (who runs a certified Martin warranty center) told me that the nut that was already on there was high quality bone ("when I sanded it down while doing the setup work, the smell was unmistakably that of bone"). So if it's imitation it must be such a good imitation that it fooled a certified martin warranty luthier and I would say that means that changing it is completely unnecessary unless there's something wrong with it.
olie Posted January 31, 2016 Posted January 31, 2016 This is strictly anecdotal but-I've been told that a way to differentiate between bone and artificial is this: artificial is usually a form of plastic and softer than bone.If you heated a pin or needle and poked it into an out-of-the way portion of the nut or whatever part you wish to test, it will melt into the plastic. It won't in the case of bone.Might do the trick. Anyone else got anything on this theory?
Monkey Lord Posted February 1, 2016 Author Posted February 1, 2016 This is strictly anecdotal but-I've been told that a way to differentiate between bone and artificial is this: artificial is usually a form of plastic and softer than bone.If you heated a pin or needle and poked it into an out-of-the way portion of the nut or whatever part you wish to test, it will melt into the plastic. It won't in the case of bone.Might do the trick. Anyone else got anything on this theory? Thats a good idea. I think I'll give it a try.
Richie321 Posted August 5, 2017 Posted August 5, 2017 These guitars have a real bone saddle and a real bone nut https://youtu.be/Jiwqgd16jLE And im not just saying there real bone cause this guys saying the same ive checked mine over and like this guy is saying its deff real bone not plastic and not a strong special plastic. But genuine Real bone .so doing any alterrations to your guitar is not needed. Unless you want bone pins but to be honest i dont think you need to i tried it and i couldnt really hear any difference to the plastic pins .but as for nut and saddle 10000000% real bone
Richie321 Posted August 6, 2017 Posted August 6, 2017 Hi mate - I think both the Texan and older EJ160Es come with imitation bone nut and bridge - apparently some luthiers think it's very close to the real thing and close enough to leave in the guitar. no the texan is genuine real bone
Richie321 Posted August 6, 2017 Posted August 6, 2017 The Texan I had was made in Indonesia at the beginning of 2014 and I bought it brand new from my local guitar center. I was going to replace the nut, but my luthier (who runs a certified Martin warranty center) told me that the nut that was already on there was high quality bone ("when I sanded it down while doing the setup work, the smell was unmistakably that of bone"). So if it's imitation it must be such a good imitation that it fooled a certified martin warranty luthier and I would say that means that changing it is completely unnecessary unless there's something wrong with it. well said .mate
Richie321 Posted August 6, 2017 Posted August 6, 2017 OK thanks. Looks like I need to replace it. No you dont its real bone
Leonard McCoy Posted August 6, 2017 Posted August 6, 2017 This has been settled already. You're late to the party. (Psst, it's synthetic bone.)
Richie321 Posted August 8, 2017 Posted August 8, 2017 This has been settled already. You're late to the party. (Psst, it's synthetic bone.) I thought i was lol But the new versions that cost £329 are cattle bone thank you
Joe G. Posted March 23, 2018 Posted March 23, 2018 My IB 1964 Texan is right in front of me, serial number starts 100617XXXX, which my understanding is June of 2010 made in China. It's the original nut, removed by me, and it is BONE. I don't have a picture host, but if someone would like, I have pictures of the original nut next to tusq, plastic(off an Epi PR-150), bleached bone and unbleached bone. It is clearly bone.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.