K.E.B.1281734147 Posted May 30, 2011 Share Posted May 30, 2011 What are my options for replaceing my 2005 Epi Dot Tune-o-matic bridge? Forgive me if this has been done to death. I just couldn't find the proper info after searching the site and web. Link to comment Share on other sites More sharing options...
stevierussell Posted May 30, 2011 Share Posted May 30, 2011 changed mine for a bigsby and roller bridge Link to comment Share on other sites More sharing options...
rockman82 Posted May 30, 2011 Share Posted May 30, 2011 I'm also wondering this. I need to replace the TOM on my Epi G400 and I'm curious if this replacement will fit properly. https://www.allparts.com/URLrewrite.asp?404;http://www.allparts.com:80/Chrome-Economy-Bridge-p/gb-2503-010.htm I'm not sure what the measurements are for Epi standards are. Link to comment Share on other sites More sharing options...
K.E.B.1281734147 Posted May 30, 2011 Author Share Posted May 30, 2011 I'm also wondering this. I need to replace the TOM on my Epi G400 and I'm curious if this replacement will fit properly. https://www.allparts...gb-2503-010.htm I'm not sure what the measurements are for Epi standards are. This is more specific towards my question. What will be a direct fit and what are the modifications if needed? Link to comment Share on other sites More sharing options...
gypsyseven Posted May 30, 2011 Share Posted May 30, 2011 I replaced the bridge on my Riviera with this: http://www.tokaiguitar.de/xtcommerce/product_info.php?language=en&info=p74_ABRM-59BG--Nickel-plated--natural-brass-saddles--gloss-finish.html I already ordered another one for my "inspred by" Casino... Link to comment Share on other sites More sharing options...
K.E.B.1281734147 Posted May 30, 2011 Author Share Posted May 30, 2011 I replaced the bridge on my Riviera with this: http://www.tokaiguit...oss-finish.html I already ordered another one for my "inspred by" Casino... Very nice. I'm in the USA so not sure that would be a suitable merchant. Does anybody know what size the posts are on my import Dot? Are they the same as the Riviera? 4mm? Link to comment Share on other sites More sharing options...
gypsyseven Posted May 30, 2011 Share Posted May 30, 2011 I´m not sure about the size.... There´s also a bridge by Allparts...also with brass saddles...what a tonal difference, you already hear it unplugged!!! Link to comment Share on other sites More sharing options...
K.E.B.1281734147 Posted May 30, 2011 Author Share Posted May 30, 2011 Some good info here... http://tonepros.com/installation.htm Link to comment Share on other sites More sharing options...
Trewblue Posted May 31, 2011 Share Posted May 31, 2011 I changed out the bridge on my Dot for a Guitarfetish roller bridge. helps with intonation. no mods, just dropped right on the posts. good luck Link to comment Share on other sites More sharing options...
eor Posted May 31, 2011 Share Posted May 31, 2011 some ritz-ier, boo-teek-ier options include: tru arc bridgeworks (have one, love it, made all the difference in the world) callaham abr1 (will give one a shot when they roll out the gold ones, no personal experience yet) Link to comment Share on other sites More sharing options...
Gordy01 Posted May 31, 2011 Share Posted May 31, 2011 Stewmac Gotoh Bridge & Tailpiece I used one of these on my latest build. Very nice wide bridge with lots of room for intonation. It also has set screws on either end of the bridge, that allow for even more adjustment. The tailpiece is aluminum, making it a bit lighter. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.