It powers up fine. In bypass mode, the signal goes through it fine. When engaged, it works fine for awhile, then the signal cuts out, but both LEDs are still lit. And it will also work if I activate the Temporary On/Off switch and apply pressure to the switch. As soon as I disengage the switch, the signal cuts out. When I’m done playing for the day, I unplug the pedal board. When I plug it in the next day, it will work fine again the entire time, other times cutting out after a few minutes. I have checked all the pedals and cables in the signal chain separately so I’m 99% certain it’s the Drop pedal.
Thanks for the heads up on the surface mounted components. I have worked with them in the past, but they definitely test the limits of my soldering skills.