Jump to content
Gibson Brands Forums

Valve Jr Upgrade


Recommended Posts

I'm trying to get the back plate off the amp. I removed all the screws but the sucker won't budge and I really don't want to break anything. Are there other screws inadditon to the ones on the back panel itself.

 

And once I get the panel off, the swapping tubes seems realtively straight-foward. Is there anything I need to be aware of?

Link to comment
Share on other sites

Yeah, they put the back panel on the cab while the tolex glue is still wet. Use a putty knife or screwdriver to break the glue between the seams. Then use it against the chassis for leverage to help wedge the back panel out. Be careful with the 'ears' on the back.

 

There's actually a video on that subject now. It might help.

 

http://www.soundgaragetales.com/epiphone-vj-mods/epiphone-valve-junior-removing-the-chassis

 

Gil...

Link to comment
Share on other sites

I'm looking to clean up my tone and hopefully add a little more clean headroom. Does anyone have any recommendations on a good 12AX7 tube to accomplish these?

Did exactly that with a Tung Sol reissue 12AX7/ECC803S gold pin + a JJ EL84.

 

Also' date=' bought a 5751 to try but have liked those reissue Tung Sol ECC803S versions so well, I've yet to bother.

 

Hit every BLUE NOTE baaaby..., I'm going to play on:-"

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...