Fretwired Posted January 24, 2010 Share Posted January 24, 2010 I'm upgrading my Dot and think the standard volume and tone controls look a little cheap. Any suggestions as to what I can replace them with? Link to comment Share on other sites More sharing options...
Swoop Posted January 24, 2010 Share Posted January 24, 2010 http://store.guitarfetish.com/knobs.html Plenty to choose from there that will fit. Link to comment Share on other sites More sharing options...
jcwillow777 Posted January 24, 2010 Share Posted January 24, 2010 I put these on my Dot: http://store.guitarfetish.com/vigstchtoblb.html GFS knobs fit Asian made guitars. Shipping to he UK is gonna cost more than the knobs, there must be a place there. I've never been to London. Make sure you get knobs with a coarse spline and they should fit fine, that is assuming you haven't changed the pots. The fine splines are for Gibson and USA made guitars and CTS pots. Link to comment Share on other sites More sharing options...
John1281734170 Posted January 24, 2010 Share Posted January 24, 2010 I just replaced mine with knobs made by Allparts. Link to comment Share on other sites More sharing options...
peeper Posted January 24, 2010 Share Posted January 24, 2010 Why, the knobs that came on your epiphone are perfect as they are and shouldn't be changed. Link to comment Share on other sites More sharing options...
deflepfan Posted January 24, 2010 Share Posted January 24, 2010 Why' date=' the knobs that came on your epiphone are perfect as they are and shouldn't be changed.[/quote']January 24, 2010 Musikron c/o Epiphone Forum World wide Web Dear Mr. Musikron, It has come to my attention that recent events have caused you to go over to the dark side. Though this is understandable, it will not be tolerated! Your contributions to all of us here have been invaluable. I personally trust your advice and opinion, but if I see you kissing butt again, I will hunt you down and take your Epi's, after which, I will whack you upside your head! Comprende?! Cut it out! With respect, Sheila Link to comment Share on other sites More sharing options...
Lord Summerisle Posted January 24, 2010 Share Posted January 24, 2010 Why' date=' the knobs that came on your epiphone are perfect as they are and shouldn't be changed.[/quote'] Nah, the ones that came on my MIC Casino were rubbish. Wafer-thin at the edges, and they pirouetted around like a drunken ballerina. Had I kept the Casino they'd have been the first thing in the bin. Followed closely by the tuners. And maybe the nut. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.