Jump to content
Gibson Brands Forums
Sign in to follow this  
TheFlame

Help, Flying V BIG finish damage

Recommended Posts

Need some advice. My son plays in a band, his Flying V is his workhorse. Close quarters during practice, I dunno, stuff happens. We talk about taking care of the expensive instruments... Latest problem, BIG finish damage on one of the wings, see pic.

 

I'm kinda handy, we could try to repaint, dub with nitro and buff to smooth. I've done some fixes on guitars. This is a pretty big biff though.

 

Question: would an attempted fix just look like a botch job, and should we just leave it and let it take it's battle scars?

 

If fixing, how can I get Alpine White touch up paint from Gibson? What type of Nitro to seal with?

 

I know the steps: paint, apply Nitro in layers, sand, layer, ultimately buff w/heat.

post-90313-081930000 1517983012_thumb.jpg

Share this post


Link to post
Share on other sites

I've played Flying V's since 1983 and mine have some similar dings on the V parts. That's a pretty big one though. If you can do a professional job and make it look like new, you can. It'll hurt the value a little but it's just another battle scar, perhaps the first of many to come. It's not as bad as a neck break. My opinion is that if you can do the job and make it look professional, go for it. You could always take it for a second opinion too and see what the costs are there. Flying V's take some getting used to because they stick out further on both ends.

Share this post


Link to post
Share on other sites

I've played Flying V's since 1983 and mine have some similar dings on the V parts. That's a pretty big one though. If you can do a professional job and make it look like new, you can. It'll hurt the value a little but it's just another battle scar, perhaps the first of many to come. It's not as bad as a neck break. My opinion is that if you can do the job and make it look professional, go for it. You could always take it for a second opinion too and see what the costs are there. Flying V's take some getting used to because they stick out further on both ends.

 

I'm just afraid of doing a botch job and making it look worse (like those celebs with plastic surgery gone bad...)

 

Matching the paint would be difficult and also getting the right type of nitro finish. At this point I'm leaning towards doing nothing.

Share this post


Link to post
Share on other sites

Hmm, I dunno,, that's a pretty large area, which would first have to be filled then, a correct finish applied.

 

I'd hunt around for a repair guy in your neck of the woods that also does finish work.

 

 

Guitars are tools,,, tools get knocked around, we've all got the scars to prove it..

 

Sometimes you just leave em be, other times, they are bad enough where a fix is in order.

 

That one to me, would need some attention. I'd be concerned the area will widen over time.

 

If my experiences are any thing to guide you, It will be worth every penny.

 

These guys that do finish repairs have the right materials, and the right touch to do these repairs professionally. There is usually no guess work. They get right at it.

 

I don't think you're looking at much more than 50/75 USD to do something about that. (Just a wild a$$ guess..)

Edited by kidblast

Share this post


Link to post
Share on other sites

I'd leave it alone. I think! It's a ding, all right...

 

What you COULD do, if you worry it'll spread, is apply very, VERY little superglue to where the cracks could spread. That you can always buff off.

 

What model V is it, btw?

Share this post


Link to post
Share on other sites

I'd leave it alone. I think! It's a ding, all right...

 

What you COULD do, if you worry it'll spread, is apply very, VERY little superglue to where the cracks could spread. That you can always buff off.

 

What model V is it, btw?

 

2017 model, which came out late 2016. Gibson wasn't making a White V for a few years before that.

Share this post


Link to post
Share on other sites

The one with Dirty Fingers pickups? I've got an ebony one with the white pickguard, and I love it.

 

Yes, that is the one. We swapped out the black knobs for white ones and the switch tip.

Share this post


Link to post
Share on other sites

Follow up. I had decided to have it professionally repaired since it was so big. I'm in the States, Seattle area. I took it to a very reputable (and expensive) shop. $80/hr and it took over an hour of shop time to fix (+ another small pockmark on back of neck which was irritating). The picture here is not clear, but if you look close in person you can tell, it's impossible to match colors completely. Overall, looks good. This won't become a habit though. If you want more info send me a message.

post-90313-096882400 1520388842_thumb.jpg

Share this post


Link to post
Share on other sites

Ding up the other wing, and it wont stand out as much.

 

so maybe go back and re-read the thread bud,, he's had it fixed...

 

The Flame: That repair looks good!

Edited by kidblast

Share this post


Link to post
Share on other sites

so maybe go back and re-read the thread bud,, he's had it fixed...

 

The Flame: That repair looks good!

 

 

I did read the thread, it's called sarcasm, lighten up.

Share this post


Link to post
Share on other sites

Follow up. I had decided to have it professionally repaired since it was so big. I'm in the States, Seattle area. I took it to a very reputable (and expensive) shop. $80/hr and it took over an hour of shop time to fix (+ another small pockmark on back of neck which was irritating). The picture here is not clear, but if you look close in person you can tell, it's impossible to match colors completely. Overall, looks good. This won't become a habit though. If you want more info send me a message.

 

Looks good.

Share this post


Link to post
Share on other sites

I did read the thread, it's called sarcasm, lighten up.

 

 

timing is everything

 

just saying..

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...