CentersJ Posted April 26, 2021 Share Posted April 26, 2021 I bought this axe new last month - absolutely mint condition at the time. Initially, I had the infamous fret buzz. After a full setup to spec and a quick check with my fret rocker, frets 1-8 were high and low, needing a fret level, crown, polish. I scheduled an appointment with a local Gibson authorized repair center for a fret level and full setup. The images attached are what I received back! I'm working with the GM at the store on repair costs, but will NOT allow them to touch my guitars ever again. Most of these areas are minor, but the finish appears to be ruined with the nitro being polished up by the luthier in an attempt to hide the scratched he put on the body. Can the satin nitro finish be easily restored? Can I raise the ding on the back of the neck with solder iron/wet cloth method or some other way? (I will replace the nut) Signed, Mr. PISSED!! Quote Link to comment Share on other sites More sharing options...
Pinch Posted April 26, 2021 Share Posted April 26, 2021 (edited) Now DON'T QUOTE ME ON THIS, but I think a good luthier could fix the nitro. I wouldn't try to do anything with the ding on the headstock. It could just make it worse. I'd get the money back for the setup, obviously, but I'd take several very deep breaths and leave everything be, even if I'd be pissed too. Just my two cents. It's still gonna be a great guitar. Edited April 26, 2021 by Pinch Quote Link to comment Share on other sites More sharing options...
Leonard McCoy Posted April 26, 2021 Share Posted April 26, 2021 (edited) At this point it is probably best to forego the satin-finish look and polish it all up to a semi-gloss sheen. You won't get the original satin sheen back. The problem with raising the grain by using the steam method on the back of the headstock, in order to mitigate the depression there, is that the lacquer and color located there will be affected by this method because it is not bare wood. Hence I would not recommend it, too risky. Edited April 26, 2021 by Leonard McCoy Quote Link to comment Share on other sites More sharing options...
CentersJ Posted April 27, 2021 Author Share Posted April 27, 2021 I've been in talks with Gibson since I posted this. I'll be having a Zoom meeting with them tomorrow morning to review the damage and get an estimate on restoring. With this being my first Gibson guitar ever (after 30+ years of playing) I want this to be in as close to original shape as when I purchased new 1 whole month ago. 😕 This will be repaired by a 'real' pro! I must say though - it sounds and plays amazing. Thanks for the feedback guys! Quote Link to comment Share on other sites More sharing options...
kidblast Posted April 29, 2021 Share Posted April 29, 2021 This is all very unfortunate. Way too many "Wups" issues to ignore here. I hope you can it get sorted out.. Quote Link to comment Share on other sites More sharing options...
NighthawkChris Posted April 29, 2021 Share Posted April 29, 2021 On 4/26/2021 at 10:53 AM, CentersJ said: Can I raise the ding on the back of the neck with solder iron/wet cloth method or some other way? Since you have finish on the neck, I wouldn't advise raising this up via your proposed method. If you had bare wood, then it would work - from experience. The idea is to get water into the wood and make it expand by your proposed method. The finish will not allow this to happen unless you compromise it in some way. Sorry about this. Good luck sorting out your business. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.