Gibson Brands Forums: can fatten up my es339? - Gibson Brands Forums

Jump to content

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

can fatten up my es339?

#1 User is offline   philastevenson 

  • Newbie
  • Group: Members
  • Posts: 6
  • Joined: 08-November 17

Posted 08 November 2017 - 08:10 AM

Hi Folks,

I was wondering if any of you have had any success beefing up your es339 for more jazz tone/low-mid presence. i also have an es335, which of course wins on tone but not on comfort. My es339 is a great versatile guitar, but im spoiled by my 335! So, is there another HB aside from the 57's that might push it into the 335s territory in terms of depth and power. or i am i after a mxr eq pedal perhaps? recently ive been using a fat tele which may even get me there.

Thanks!
0

#2 User is offline   jdgm 

  • Now's The Time!
  • Group: All Access
  • Posts: 6338
  • Joined: 05-January 12
  • LocationIt's nice to be anywhere

Posted 08 November 2017 - 09:34 AM

Hello

You could get the same pups as in your 335, or look at other options - Seymour Duncan, DiMarzio, Kent Armstrong, there are lots.
However more powerful pups can sometimes be a bit muddy too.

An eq pedal is good as it means you don't have to mod the guitar.
However both the Boss GE7 and the MXR108 are a bit noisy; I have a Boss GE7 which was modded - you have to change maybe 10 worth of parts, kits available on ebay - and it is now completely hiss-free so the mod was well worth doing.

Similar mods available for MXR at Griffin effects -

http://www.griffineffects.com/264-mxr

Good luck.
0

#3 User is offline   merciful-evans 

  • I doubt I'm entitled to a title
  • Group: All Access
  • Posts: 3004
  • Joined: 28-May 15
  • LocationPortsmouth UK

Posted 08 November 2017 - 10:36 AM

Are you comparing them at home or at gigging volume?
My 339 doesnt sound too much different from the LP (same 57 pups) at home but sounds utterly different at volume; warmer, subtler, richer.

I use a Line 6 signal processor with only minor eq changes dedicated to each guitar. They all sound different, but I dont have a 335 for comparison.
I suspect that a 335 will always sound different, but there are certainly ways of tweaking eq to your liking on any guitar.
Hagstrom Deuce / Fylde Acoustic / Variax Standard / Gibson ES-339 / Gibson LP Less+ / PRS SE Custom24 / Hofner HCT-J17 / Camps Spanish / Jackson Soloist / Rickenbacker 650 /Squier Esprit
Miele S5 Power 2200w Vacuum Cleaner
Makita BO3710 Finishing Sander
Verdict 6" vernier scale calipers
Whittard of Chelsea Florence blue teapot
Spear & Jackson 1712PF/INS12 trenching fork

*
Posted Image put the kettle on
I sometimes think; therefore I am intermittent
*
my band BLOWN OUT
0

#4 User is offline   philastevenson 

  • Newbie
  • Group: Members
  • Posts: 6
  • Joined: 08-November 17

Posted 08 November 2017 - 01:20 PM

View Postmerciful-evans, on 08 November 2017 - 10:36 AM, said:

Are you comparing them at home or at gigging volume?
My 339 doesnt sound too much different from the LP (same 57 pups) at home but sounds utterly different at volume; warmer, subtler, richer.

I use a Line 6 signal processor with only minor eq changes dedicated to each guitar. They all sound different, but I dont have a 335 for comparison.
I suspect that a 335 will always sound different, but there are certainly ways of tweaking eq to your liking on any guitar.


its gigging volume - when i play low single notes they dont sound serious, and the high notes dont feel supported, and neither do they cut through the mix massively. i can turn up, which solves the cutting through part, but doesnt help with the overall character. my es335, my fat tele, and my eastman 185 all sound like they want to heard. I'll try out an EQ pedal then.

thanks
0

#5 User is offline   philastevenson 

  • Newbie
  • Group: Members
  • Posts: 6
  • Joined: 08-November 17

Posted 08 November 2017 - 01:21 PM

View Postjdgm, on 08 November 2017 - 09:34 AM, said:

Hello

You could get the same pups as in your 335, or look at other options - Seymour Duncan, DiMarzio, Kent Armstrong, there are lots.
However more powerful pups can sometimes be a bit muddy too.

An eq pedal is good as it means you don't have to mod the guitar.
However both the Boss GE7 and the MXR108 are a bit noisy; I have a Boss GE7 which was modded - you have to change maybe 10 worth of parts, kits available on ebay - and it is now completely hiss-free so the mod was well worth doing.

Similar mods available for MXR at Griffin effects -

http://www.griffineffects.com/264-mxr

Good luck.

0

#6 User is offline   philastevenson 

  • Newbie
  • Group: Members
  • Posts: 6
  • Joined: 08-November 17

Posted 08 November 2017 - 01:24 PM

View Postjdgm, on 08 November 2017 - 09:34 AM, said:

Hello

You could get the same pups as in your 335, or look at other options - Seymour Duncan, DiMarzio, Kent Armstrong, there are lots.
However more powerful pups can sometimes be a bit muddy too.

An eq pedal is good as it means you don't have to mod the guitar.
However both the Boss GE7 and the MXR108 are a bit noisy; I have a Boss GE7 which was modded - you have to change maybe 10 worth of parts, kits available on ebay - and it is now completely hiss-free so the mod was well worth doing.

Similar mods available for MXR at Griffin effects -

http://www.griffineffects.com/264-mxr

Good luck.


i think they are 57s aswell! i should double check.. im guessing your sound with the EQ pedal still sounds natural and not artificial? i'll try one when i get a chance.

thanks
0

#7 User is offline   clayville 

  • 356 is my number
  • Group: All Access
  • Posts: 315
  • Joined: 16-January 08
  • LocationBoston

Posted 09 November 2017 - 09:08 AM

In some respects, the smaller body size of the 339 just has a different character than the, er, full-bodied oomph of a 335 - in clean, lo-gain situations it will sound "smaller" because, well, it IS smaller. But if it sounds constricted, try comparing the pickup height between the two guitars. If your 339's pickups are much closer to the strings than your 335's it's possible they're reducing the perceived resonance and richness. The pickups themselves should be fine (I love mine), but I'd experiment with height to see if you can get closer to your ideal. I find the small-bodied Gibsons like my 356 to be sensitive to such things, so I'd try lowering your neck pickup a bit and fiddling with pole piece height across the strings to try and dial in the sound you're after, then do the same with the bridge pickup to balance for volume between the two pickups. Always try screwdriver mods first!

Just my two cents
1

#8 User is offline   merciful-evans 

  • I doubt I'm entitled to a title
  • Group: All Access
  • Posts: 3004
  • Joined: 28-May 15
  • LocationPortsmouth UK

Posted 09 November 2017 - 11:07 AM

View Postphilastevenson, on 08 November 2017 - 01:20 PM, said:

its gigging volume - when i play low single notes they dont sound serious, and the high notes dont feel supported, and neither do they cut through the mix massively. i can turn up, which solves the cutting through part, but doesnt help with the overall character. my es335, my fat tele, and my eastman 185 all sound like they want to heard. I'll try out an EQ pedal then.

thanks


It sounds like you have sacrificed some much needed treble by trying to adjust eq for 335 tones?! Thats only a guess of course. Maybe some sort of treble boost would give you more eq to play with.
Hagstrom Deuce / Fylde Acoustic / Variax Standard / Gibson ES-339 / Gibson LP Less+ / PRS SE Custom24 / Hofner HCT-J17 / Camps Spanish / Jackson Soloist / Rickenbacker 650 /Squier Esprit
Miele S5 Power 2200w Vacuum Cleaner
Makita BO3710 Finishing Sander
Verdict 6" vernier scale calipers
Whittard of Chelsea Florence blue teapot
Spear & Jackson 1712PF/INS12 trenching fork

*
Posted Image put the kettle on
I sometimes think; therefore I am intermittent
*
my band BLOWN OUT
0

#9 User is offline   badbluesplayer 

  • ZIPPER CLUBBER
  • Group: All Access
  • Posts: 5439
  • Joined: 14-April 08
  • LocationJonesborough, TN

Posted 09 November 2017 - 04:51 PM

I've had both the 339 and the 335, both with classic 57's, and I can say this. The "Memphis Tone Circuit" style of wiring, like the 339 has, is much different than standard modern wiring, like most 335's have. It's similar to 50's style wiring but with even less of a sweet spot to work with once you start backing the controls down from 10. My 2011 ES-335 was also wired like that at the factory and it was terrible compared to regular modern style. I rewired both guitars to modern style. My 335 also has a treble bleed circuit. Modern wiring gives you more punch and power through a wider range of operation of the controls. [thumbup] [thumbup]
_________________________________

TENNESSEE AMPLIFIER COMPANY
1

#10 User is offline   ScottDownSouth 

  • Newbie
  • Group: All Access
  • Posts: 9
  • Joined: 26-November 17

Posted 26 November 2017 - 11:32 PM

Have you checked what pots are in both guitars? It could be as simple as the 335 has 500k pots and the 339 has 300k. Im not sure what Gibson puts into the 339's with the Memphis tone Curcuit, but Im about to find out. Ive got a 2013 339 on lay away....

Cheers, Scott.
1

#11 User is offline   sparquelito 

  • Tourette's Syndrome Sufferer
  • Group: All Access
  • Posts: 2181
  • Joined: 31-May 15
  • LocationNorthern Alabama

Posted 27 November 2017 - 04:53 AM

Compression/Sustain pedal.

BOSS - CS-3


Posted Image
Am I alone in this?

Am I alone?
0

#12 User is offline   philastevenson 

  • Newbie
  • Group: Members
  • Posts: 6
  • Joined: 08-November 17

Posted 27 November 2017 - 11:21 AM

View Postmerciful-evans, on 09 November 2017 - 11:07 AM, said:

It sounds like you have sacrificed some much needed treble by trying to adjust eq for 335 tones?! Thats only a guess of course. Maybe some sort of treble boost would give you more eq to play with.


haha i never touch my tone control! ever since i heard thomas mapfumo+jonah sithole!
0

#13 User is offline   philastevenson 

  • Newbie
  • Group: Members
  • Posts: 6
  • Joined: 08-November 17

Posted 27 November 2017 - 11:24 AM

View PostScottDownSouth, on 26 November 2017 - 11:32 PM, said:

Have you checked what pots are in both guitars? It could be as simple as the 335 has 500k pots and the 339 has 300k. Im not sure what Gibson puts into the 339's with the Memphis tone Curcuit, but Im about to find out. Ive got a 2013 339 on lay away....

Cheers, Scott.


thanks i'll find out!
0

Share this topic:


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users