vexorgtr Posted April 30, 2013 Share Posted April 30, 2013 In the Late 70's, The LP got a maple neck... because quality mahogany was an issue I guess.... I have one from Jan 79 with it. I've also seen 78's with them. Any other years? Yes, I like my Norlin Maple Neck Volute headstock goldtop. Serial puts it in early Nashville production. Quote Link to comment Share on other sites More sharing options...
btoth76 Posted April 30, 2013 Share Posted April 30, 2013 I like my Norlin Maple Neck Volute headstock too, and I am proud of it! I have no idea - to be honest. My 1978 Recording has 3-piece maple neck too. The '74 Customs had 3-piece mahogany necks. Between '76-'79, maybe? Cheers... Bence Quote Link to comment Share on other sites More sharing options...
Pin Posted April 30, 2013 Share Posted April 30, 2013 My 1978 25 / 50 has a 5 piece maple neck (two walnut skunk stripes running right through) with an ebony board and I think it is great! EDIT: Obviously, I mean three pieces of maple! Quote Link to comment Share on other sites More sharing options...
diddy Posted May 1, 2013 Share Posted May 1, 2013 I played a 74 es-335 and I'm pretty sure it had a maple neck Quote Link to comment Share on other sites More sharing options...
pippy Posted May 1, 2013 Share Posted May 1, 2013 Most sources say 3-piece maple was introduced into the range in 1974 and the re-introduction of mahogany was during 1981. P. Quote Link to comment Share on other sites More sharing options...
charlie brown Posted May 1, 2013 Share Posted May 1, 2013 My '76 LP Deluxe, and 1980 LP Custom both have 3-piece Maple necks! They're both very heavy guitars, but also very stable, and toneful! LOVE 'em! [thumbup] CB Quote Link to comment Share on other sites More sharing options...
ZenKen Posted May 1, 2013 Share Posted May 1, 2013 I have a 1971 Les Paul Deluxe with 3 piece maple top and 3 piece maple neck so it goes back at least to 1971. And like Charlie's it's a heavy beast. Quote Link to comment Share on other sites More sharing options...
pippy Posted May 1, 2013 Share Posted May 1, 2013 I have a 1971 Les Paul Deluxe with 3 piece maple top and 3 piece maple neck so it goes back at least to 1971. And like Charlie's it's a heavy beast. Are you absolutely sure it isn't a 3-piece mahogany neck, Z-K? This style was introduced about '69 - '70 and lasted until '74. P. Quote Link to comment Share on other sites More sharing options...
ZenKen Posted May 1, 2013 Share Posted May 1, 2013 Actually I'm not Pippy. All I know for sure is that it is 3 piece. The whole thing is 3 piece. 3 piece neck, 3 piece top and the infamous 3 piece pancake body. Quote Link to comment Share on other sites More sharing options...
charlie brown Posted May 2, 2013 Share Posted May 2, 2013 Les Paul models in the Norlin era (1969–1985) 1974 Custom Subsequent years brought new company ownership to the Gibson Guitar Company. During the "Norlin Era", Gibson Les Paul body designs were greatly altered, most notably, the change to the neck volute. Because the Les Paul had the reputation of having an easily broken neck joint, the volute strengthened the neck where it joined the headstock to avert breakage. To further increase the strength, the neck woods were changed from mahogany to a three-piece maple design. The LP body was changed from a one-piece mahogany with a maple top into multiple slabs of mahogany with multiple pieced maple tops. This is referred to as "multipiece" construction, and sometimes incorrectly referred to as a "pancake" body. The expression "pancake body" actually refers to a body made of a thin layer of maple sandwiched between two slabs of mahogany, with a maple cap. The grain of the maple was placed at 90 degrees to that of the mahogany. The "pancake"-like layers are clearly visible when looking at the edge of the guitar. This process is also known as "crossbanding", and was done for strength and resistance to cupping/warping. Crossbanding was phased out by 1977. S-1, Marauder, Sonex, Spirit, L6-S In this era, as well, Gibson began experimenting with new models such as the Les Paul Recording. This model is generally unpopular with guitarists due to its complex electronics. The Recording featured low-impedance pickups, many switches and buttons, and a highly specialized cable for impedance-matching to the amplifier. Less noticeable changes included, but were not limited to, maple fingerboards (1976), pickup cavity shielding, and the crossover of the ABR1 Tune-o-matic bridge into the modern day Nashville Tune-o-matic bridge. During the 1970s, the Les Paul body shape was incorporated into other Gibson models, including the S-1, the Sonex, the L6-S, and other models that did not follow the classic Les Paul layout. Deluxe 1972 Deluxe with mini-humbuckers 1969 Deluxe The Deluxe was among the "new" 1968 Les Pauls. This model featured "mini-humbuckers", also known as "New York" humbuckers, and did not initially prove popular. The mini-humbucker pickup fit into the pre-carved P-90 pickup cavity using an adaptor ring developed by Gibson (actually just a cut-out P90 pickup cover) in order to use a supply of Epiphone mini-humbuckers left over from when Gibson moved Epiphone production to Japan. The DeLuxe was introduced in late 1968 and helped to standardize production among Gibson's US-built Les Pauls. The first incarnation of the Deluxe featured a one-piece body and slim three-piece neck in late 1968. The "pancake" body (thin layer of maple on top of two layers of Honduran mahogany) came later in 1969. In late 1969, a small "volute" was added. 1969 Deluxes feature the Gibson logo devoid of the dot over the "i" in Gibson. By late 1969/early 1970, the dot over the "i" had returned, plus a "Made In USA" stamp on the back of the headstock. The Deluxe could be special ordered with full-size Humbucker T-Top pickups, these full size versions of the Deluxe were "Standard" spec. They were also available with "Gibson" embossed pickups in 1972 only and considered rare, as only 9 were produced. David Bowie Can be seen playing one of the 1972 "Standards" in his 1972 release Jean Genie video. By 1975, the neck construction was changed from mahogany to maple, until the early 1980s, when the construction was returned to mahogany. The body changed back to solid mahogany from the pancake design in late 1976 or early 1977. Inte reintroduced rest in this particular Les Paul model was so low that in 1985, Gibson canceled the line. However, in 2005, the Deluxe was with more popularity due to its association with Pete Townshend [1] and Thin Lizzy. In 1978 the Les Paul Pro Deluxe was introduced. This guitar featured P-90 pickups instead of the "mini-humbuckers" of the Deluxe model, an ebony fingerboard, maple neck, mahogany body and chrome hardware. It came in Ebony, Cherry Sunburst, Tobacco Sunburst or Gold finishes. Interestingly, it was first launched in Europe, rather than the US. It was discontinued in 1983. CB 1 Quote Link to comment Share on other sites More sharing options...
pippy Posted May 2, 2013 Share Posted May 2, 2013 1974 Custom...the neck woods were changed from mahogany to a three-piece maple design....(by 1975) the neck construction was changed from mahogany to maple, until the early 1980s, when the construction was returned to mahogany. Thanks, CB. This reinforces the info in post #5. P. Quote Link to comment Share on other sites More sharing options...
ZenKen Posted May 2, 2013 Share Posted May 2, 2013 Thanks guys. Maybe this helps explain why the thing is so heavy. Quote Link to comment Share on other sites More sharing options...
JM2112 Posted May 2, 2013 Share Posted May 2, 2013 You'll have a hard time finding anything better for a neck than maple. It's very strong, very dense and durable. Once the truss rod is adjusted properly you'll likely never have to touch it again. Gibson still uses a maple neck on the EDS-1275, and who can blame them with all that tension?!?!? Quote Link to comment Share on other sites More sharing options...
charlie brown Posted May 2, 2013 Share Posted May 2, 2013 I actually wouldn't mind, if Gibson used 3-piece Maple necks, on ALL their guitars! Brighter tone, or not! CB 1 Quote Link to comment Share on other sites More sharing options...
relayer55 Posted May 4, 2013 Share Posted May 4, 2013 I have a 1970 les paul mahogany had a 71 maple 3 piece up to 1980 I think Quote Link to comment Share on other sites More sharing options...
Tumbling Dice Posted July 24, 2020 Share Posted July 24, 2020 I have a 1981 Les Paul Custom. My mom bought it for me brand new in December of 1981, and I have been the only owner of the guitar. I checked the serial number and it indicates that it was built in Nashville in late November of 1981. It appears to be a 3-piece neck, but I can't tell if it's mahogany or maple. How can I tell? Or are all 3-piece Les Paul necks maple? Quote Link to comment Share on other sites More sharing options...
merciful-evans Posted July 25, 2020 Share Posted July 25, 2020 20 hours ago, Tumbling Dice said: I have a 1981 Les Paul Custom. My mom bought it for me brand new in December of 1981, and I have been the only owner of the guitar. I checked the serial number and it indicates that it was built in Nashville in late November of 1981. It appears to be a 3-piece neck, but I can't tell if it's mahogany or maple. How can I tell? Or are all 3-piece Les Paul necks maple? Maple has a much finer grain than mahogany. If your Custom has a stained back you will see the mahogany grain. Quote Link to comment Share on other sites More sharing options...
Eric Ronson Posted July 5, 2021 Share Posted July 5, 2021 In late 1974 Gibson began using 3-piece Maple Necks on Les Pauls, by January 1976, every neck was Maple. I have a 1972 Deluxe with a 3-piece Mahogany Neck and a RARE 2-piece curly maple top. I also have a 1976 Custom with a 3-piece Maple Neck / Maple Fingerboard but I have a 1994 Les Paul Classic which has a 1-piece Mahogany Neck. I don’t recall if the Heritage Elite Les Paul (1980-81) had a Maple Neck, though? The 25/50 Anniversary Les Paul definitely had a Maple Neck though. Quote Link to comment Share on other sites More sharing options...
01GT eibach Posted July 5, 2021 Share Posted July 5, 2021 18 hours ago, Eric Ronson said: In late 1974 Gibson began using 3-piece Maple Necks on Les Pauls, by January 1976, every neck was Maple. I have a 1972 Deluxe with a 3-piece Mahogany Neck and a RARE 2-piece curly maple top. I also have a 1976 Custom with a 3-piece Maple Neck / Maple Fingerboard but I have a 1994 Les Paul Classic which has a 1-piece Mahogany Neck. I don’t recall if the Heritage Elite Les Paul (1980-81) had a Maple Neck, though? The 25/50 Anniversary Les Paul definitely had a Maple Neck though. Eric -- Thanks for the detailed info. Maybe at some point you can post some pics of your killer guitars in these forums. Welcome!!! Quote Link to comment Share on other sites More sharing options...
merciful-evans Posted July 6, 2021 Share Posted July 6, 2021 I prefer maple necks. The 2015 ES-339 Studio has one. One of the plus points for me. Quote Link to comment Share on other sites More sharing options...
Grog Posted July 6, 2021 Share Posted July 6, 2021 I had a 1975 Les Paul Recording with a maple neck, I still have a 1972 EB-4L with a maple neck. All of the Les Paul Tribute DC guitars & basses that came out in 2019 had mahogany bodies & maple necks……. Quote Link to comment Share on other sites More sharing options...
Dlee Posted December 13, 2021 Share Posted December 13, 2021 Hello everybody. I just have a quick question... Have any of you ever seen a 70's era Gibson Les Paul Custom in black with gold Hardware, 3 pickups and a maple fretboard? I mean is this thing real? I can't seem to find anything that leads me to believe it's not real except for the fact that I cannot find it anywhere on the internet. A gentleman is looking to trade for something that I have and I'm very interested I'm also very cautious. Any help would be greatly appreciated. I tried to upload photograph but it won't let me for some reason. Quote Link to comment Share on other sites More sharing options...
jdgm Posted December 13, 2021 Share Posted December 13, 2021 Hi - the best way to post photos on this site is to upload to a free image-sharing site (imgur, postimage, etc) and copy and paste the 'direct link' they give to the photo. I think you can do this on fbk and google too but only members can see. I don't think the one you mention would have started life with 3 pickups - but it's not impossible. LPs with maple fretboard - searched for images: https://www.google.com/search?source=univ&tbm=isch&q=gibson+les+paul+maple+fretboard&client=firefox-b-d&fir=KkEeX4y3Z9vecM%2CbWCMJmTBOyK_pM%2C_%3B4XwaiRhCHoT8MM%2Cvhv4oOxh2mBxuM%2C_%3BOccrQE-wxEyYeM%2CbsKUptMTf79XyM%2C_%3BnLtNOpFvaEgppM%2C3xKL-N1fcrX6AM%2C_%3BCW9WrOqutiwCQM%2Czh_e2x21Oa413M%2C_%3BOBUmr9ycVe6WyM%2C9cjeIju20UbAGM%2C_%3BSsx8XGoygj_fnM%2CYpmSHsH4COs4lM%2C_%3BRW3Bdr6Ywq_5LM%2CfRoiEvJAkmA-KM%2C_%3BXHmAD48ueoUo3M%2CiYDKWfERkE8jhM%2C_%3BnHqNB4q95Lx-fM%2C_spKM6jMcJJtpM%2C_&usg=AI4_-kSX3-FRq49hLNM2bLPWySBoNEX6tA&sa=X&ved=2ahUKEwjhg7KYleH0AhWEZMAKHeJbCVMQjJkEegQIBxAC&biw=1920&bih=1075 Best wishes! Quote Link to comment Share on other sites More sharing options...
Randy99CL Posted December 16, 2021 Share Posted December 16, 2021 I wonder if players are resisting maple necks, I have no idea. Is it still an "old way" thing, resisting change? I own two Tribute models that have maple necks and I prefer them to mahogany. The first is a 2019 Les Paul Studio Tribute and the second I just bought new a few weeks ago: an SG Tribute Raven (GC limited edition). Both necks are satin finish maple and feel and play great but the higher models all go back to mahogany necks. I know from woodworking experience that mahogany is not a very dense or strong wood and I'm convinced that maple will not split as easily as the other. I'm still very careful with all my guitars but I believe that maple will not break as easily. Quote Link to comment Share on other sites More sharing options...
merciful-evans Posted December 16, 2021 Share Posted December 16, 2021 3 hours ago, Randy99CL said: I wonder if players are resisting maple necks, I have no idea. Is it still an "old way" thing, resisting change? Absolutely it is. However, they have justification also; citing tone difference (highly contentious still of course), and weight. Maple is certainly heavier. Quote I know from woodworking experience that mahogany is not a very dense or strong wood and I'm convinced that maple will not split as easily as the other. I'm still very careful with all my guitars but I believe that maple will not break as easily. My luthier says this about headstock breaks: Mahogany breaks easier, but its easier to repair as the break is frequently 'clean'. Maple is much tougher, but it never breaks cleanly and is much more difficult to repair. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.