Jump to content
Gibson Brands Forums

Cleaning solutions


goldtop2

Recommended Posts

I usually spay it onto an area on the back away from the control panel, then use what's left on the cloth to clean the front. There is in most cases enough to do the front. if not, spray a bit more on the cloth.

 

LZoqzpg.jpg

Link to comment
Share on other sites

for cleaning if you're just looking for something easy and mild, some soapy water in a bowl with a cotton rag dampened in the solution should not be a problem for anything. just not TOO wet, dampen only.

 

for strings cleaning, take a small cotton rag and dampen on corner with rubbing alcohol pinch the strings with the tip of your fingers, then just slide it back and forth. Just try not to make it TOO wet with the rubbing alcohol. Just a bit dampness.. all ya need. you'll see the black gunk lift right off.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...