seanm Posted July 14, 2020 Share Posted July 14, 2020 So I took the guitar to a shop for setup a while back and the guys there had no idea what they were doing. A month or so later I noticed that they also scratched the finish around the height adjustment knobs on the bridge, all the way down to the wood in one spot! It's a Les Paul Special (so a flat top) with an ebony nitro finish. I don't mind dents and scratches from wear and tear but seeing these ones from just carelessly scraping pliers on the finish really irritates me! Any suggestions on how to make it look nice again? Pics: Quote Link to comment Share on other sites More sharing options...
rct Posted July 14, 2020 Share Posted July 14, 2020 Sharpie. rct Quote Link to comment Share on other sites More sharing options...
tx-ogre Posted July 14, 2020 Share Posted July 14, 2020 I have never used these before, but they come in a variety of colors, including Black Opaque Lacquer: https://www.stewmac.com/luthier-tools-and-supplies/materials-and-supplies/finishing-supplies/colors-and-tints-and-stains/colortone-touch-up-marker.html Quote Link to comment Share on other sites More sharing options...
sunking101 Posted July 15, 2020 Share Posted July 15, 2020 Ugh. That's terrible. You loosen the strings and then turn those knurled knobs with your fingers, not a pair of pliers. Amateurs. The trouble with using a sharpie is that the colour often dries with a slight purple tint rather than deep black. You could try a spot of black nail polish or actual black paint. A (decent) luthier or furniture repair man could do an invisible repair but it will cost you... Quote Link to comment Share on other sites More sharing options...
kidblast Posted July 16, 2020 Share Posted July 16, 2020 On 7/14/2020 at 7:35 PM, tx-ogre said: I have never used these before, but they come in a variety of colors, including Black Opaque Lacquer: https://www.stewmac.com/luthier-tools-and-supplies/materials-and-supplies/finishing-supplies/colors-and-tints-and-stains/colortone-touch-up-marker.html I have used these, they work good for small areas like that. kind of like a drop and fill technique. Quote Link to comment Share on other sites More sharing options...
gnappi Posted July 16, 2020 Share Posted July 16, 2020 Options are few, cover it with lacquer / shellac stick (or other some such) get it refinished, or leave it alone. I'd leave it as is and chalk it up to a battle scar. Quote Link to comment Share on other sites More sharing options...
tx-ogre Posted July 16, 2020 Share Posted July 16, 2020 7 hours ago, kidblast said: I have used these, they work good for small areas like that. kind of like a drop and fill technique. Good to know. I will keep that in mind should I need to do any minor repairs. Quote Link to comment Share on other sites More sharing options...
Pinch Posted July 17, 2020 Share Posted July 17, 2020 On 7/16/2020 at 12:17 AM, sunking101 said: Ugh. That's terrible. You loosen the strings and then turn those knurled knobs with your fingers, not a pair of pliers. Amateurs. That does indeed look like a pair of pliers were used. I know, because I've done it myself before I realized you should loosen the strings and you don't need pliers. To my credit, I put some cloth in between so I didn't wreck the knobs. It's one of... probably three wise choices I've made on this planet. Us Asparagus Rexes didn't become extinct for nothin', you know. Quote Link to comment Share on other sites More sharing options...
Leonard McCoy Posted July 17, 2020 Share Posted July 17, 2020 A touchup marker like those by StewMac https://www.stewmac.com/luthier-tools-and-supplies/materials-and-supplies/finishing-supplies/colors-and-tints-and-stains/colortone-touch-up-marker.html work well here. Quote Link to comment Share on other sites More sharing options...
Sgt. Pepper Posted July 17, 2020 Share Posted July 17, 2020 Just leave it alone. Its a right of passage. Chances are it will not be the only ones you ever get on that or any guitar you own. The first one hurts the most. Then its road worn. 1 Quote Link to comment Share on other sites More sharing options...
Eracer_Team Posted July 17, 2020 Share Posted July 17, 2020 I second use of a black sharpie, Otherwise leave it Quote Link to comment Share on other sites More sharing options...
kidblast Posted July 18, 2020 Share Posted July 18, 2020 19 hours ago, Leonard McCoy said: A touchup marker like those by StewMac https://www.stewmac.com/luthier-tools-and-supplies/materials-and-supplies/finishing-supplies/colors-and-tints-and-stains/colortone-touch-up-marker.html work well here. well yes,,, we've already discussed that... and please.. don't use a sharpie, it will end up looking like crap. Quote Link to comment Share on other sites More sharing options...
mr.chEn Posted July 25, 2020 Share Posted July 25, 2020 On the one hand.... You just paid a lot of money for a new instrument and you want it to be as clean as possible for as long as you can keep it. On the other hand... It is the nature of every guitar that gets played to become ding'd and scratched. Psychologically you may feel upset because the scratches here don't involve self-inflicted or 'natural' patina... But my opinion is that with Gibsons you really need to accept the easy dents that come with a lacquer finish. If anything maybe call back the shop and tell them about the damages if only for their own awareness and self improvement?? Maybe they'll throw in a few free set ups down the line if you're trying to be helpful about it and not malicious. Quote Link to comment Share on other sites More sharing options...
kidblast Posted July 26, 2020 Share Posted July 26, 2020 On 7/25/2020 at 4:34 AM, mr.chEn said: On the one hand.... You just paid a lot of money for a new instrument and you want it to be as clean as possible for as long as you can keep it. On the other hand... It is the nature of every guitar that gets played to become ding'd and scratched. Psychologically you may feel upset because the scratches here don't involve self-inflicted or 'natural' patina... But my opinion is that with Gibsons you really need to accept the easy dents that come with a lacquer finish. If anything maybe call back the shop and tell them about the damages if only for their own awareness and self improvement?? Maybe they'll throw in a few free set ups down the line if you're trying to be helpful about it and not malicious. These guys were armatures at best. There's no need on earth to use anything other than your fingers to move those wheels. You first detune the strings to take the stress off the bridge, make the adjustment, and retune. Repeat as needed. That's the process. They neglected to do that. Forcing it like they did also damages the threads. These guys should not be getting anywhere near peoples guitars with tools. Quote Link to comment Share on other sites More sharing options...
btoth76 Posted July 26, 2020 Share Posted July 26, 2020 Drop fill for chips, flashcoat for deep scratches. Bence. Quote Link to comment Share on other sites More sharing options...
btoth76 Posted July 26, 2020 Share Posted July 26, 2020 Quote Link to comment Share on other sites More sharing options...
Sgt. Pepper Posted July 26, 2020 Share Posted July 26, 2020 I just read the original post and it looks like the people that did your setup did that. You've got the right to go grab a brick and throw it through their store window. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.