philfish Posted November 24, 2021 Share Posted November 24, 2021 Strings that is, 12-54 phosphor bronze on a 45TV Replaced my go to's nickel bronze that I played to death It's a nice honeymoon Quote Link to comment Share on other sites More sharing options...
rbpicker Posted November 24, 2021 Share Posted November 24, 2021 I agree, Phil fish. Nice mellow sound but plenty of umph! I always found them comfortable to play as well. I’ll need to get another set or two, it’s been a while. Monels are my favs on my J45 and Gospel. roger Quote Link to comment Share on other sites More sharing options...
j45nick Posted November 24, 2021 Share Posted November 24, 2021 45 minutes ago, philfish said: Strings that is, 12-54 phosphor bronze on a 45TV Replaced my go to's nickel bronze that I played to death It's a nice honeymoon Just changed a set on one of my J-45s after 18 months. I love Sunbeams. 1 Quote Link to comment Share on other sites More sharing options...
MissouriPicker Posted November 25, 2021 Share Posted November 25, 2021 I should probably try some Sunbeams. Don’t think I’ve ever used them before. I’ve been using Martin SPs for years. Perhaps it’s time to make a change…….Even old dogs can/should learn new tricks. Quote Link to comment Share on other sites More sharing options...
BoSoxBiker Posted November 25, 2021 Share Posted November 25, 2021 I've got them on my J-45 Historic and Love Dove. Brings down some brightness. I've tried the Hummingbird and D-41, but thought it tamed too much. Quote Link to comment Share on other sites More sharing options...
Brucebubs Posted November 25, 2021 Share Posted November 25, 2021 Funny thing about Sunbeams - first tried .013's on my Epiphone EJ-200 and they strangled the heck out of the guitar - by chance I also had a set of .012's - the difference was stunning - lifted that guitar up a couple of levels. Even tried the hex-core Rares for comparison one day - back to back with round-core Sunbeams - nope, preferred the sound of the string separation of the Sunbeams. Quote Link to comment Share on other sites More sharing options...
egoidealmusic Posted November 26, 2021 Share Posted November 26, 2021 I've got a set of these that I'll put on my 45 after the current monels wear out (or I just get bored one day and do it). How are folks finding the lifespan on the Sunbeams? Quote Link to comment Share on other sites More sharing options...
generaldreedle Posted November 26, 2021 Share Posted November 26, 2021 I like them on my Southern Jumbo Quote Link to comment Share on other sites More sharing options...
Jinder Posted November 26, 2021 Share Posted November 26, 2021 (edited) I like DR strings a lot. Veritas are my favourite but I like Rares too. Sunbeams are nice on Mahogany guitars but can sound a bit restrained on Maple instruments. Rares are nice hex-cores but not as striking as the Veritas and Sunbeams. The only real stinker in the DR line is their Dragon Skin coated strings, I couldn’t stand those things at all! Edited November 26, 2021 by Jinder Quote Link to comment Share on other sites More sharing options...
zombywoof Posted November 26, 2021 Share Posted November 26, 2021 Years ago I got hooked on Sunbeams for a bit. I have always cottoned to strings wound on a round core because of feel. But in the end I returned to Newtones - Heritage on the lighter built older Gals and Master Class on the newer kids. The way I feel about Sunbeams is that way I feel about many strings which is pretty much "Meh" meaning while they are fine and I have no complaints with them they are still nothing to write home about. Quote Link to comment Share on other sites More sharing options...
BoSoxBiker Posted November 26, 2021 Share Posted November 26, 2021 1 hour ago, Jinder said: Sunbeams are nice on Mahogany guitars but can sound a bit restrained on Maple instruments...... I like them on my only Maple (Dove) quite a lot at first, but lost their magic just under 3 weeks in. (played near daily) Quote Link to comment Share on other sites More sharing options...
Kwlsky Posted December 1, 2021 Share Posted December 1, 2021 My next set of strings are going to be Sunbeams. Maybe I've been missing out on something, maybe not. Either way I'm going to find out. Quote Link to comment Share on other sites More sharing options...
dhanners623 Posted December 10, 2021 Share Posted December 10, 2021 Finally got a set of Sunbeam mediums and strung up the J-35 today. So far, so good, although I want to give them some time to see what I think of them and whether they are worth a switch from the Martin Retros I've been using. One odd thing, though, and in all my years of playing guitar, I've never had this happen. When I string a guitar, I have taken to cutting the excess off the strings before putting them on the guitar. All went well until I cut the 6th string and put it on. Something must've happened to the winding when I cut the string because when I tried to tune the string to pitch, all I got was the sound of someone plucking a rubber band. Took the string off and tried again. Same deal. It sounded like a cheap bass. I've never had that experience. I had an extra set of Sunbeams so I took the 6th string from that set. I strung it up and then cut it. Sounded just fine. Quote Link to comment Share on other sites More sharing options...
Brucebubs Posted December 10, 2021 Share Posted December 10, 2021 17 minutes ago, dhanners623 said: Finally got a set of Sunbeam mediums and strung up the J-35 today. So far, so good, although I want to give them some time to see what I think of them and whether they are worth a switch from the Martin Retros I've been using. One odd thing, though, and in all my years of playing guitar, I've never had this happen. When I string a guitar, I have taken to cutting the excess off the strings before putting them on the guitar. All went well until I cut the 6th string and put it on. Something must've happened to the winding when I cut the string because when I tried to tune the string to pitch, all I got was the sound of someone plucking a rubber band. Took the string off and tried again. Same deal. It sounded like a cheap bass. I've never had that experience. I had an extra set of Sunbeams so I took the 6th string from that set. I strung it up and then cut it. Sounded just fine. Didn't you open the pack up and read the instructions for installing round-core strings? Go open up the empty box. Quote Link to comment Share on other sites More sharing options...
j45nick Posted December 10, 2021 Share Posted December 10, 2021 19 minutes ago, dhanners623 said: Finally got a set of Sunbeam mediums and strung up the J-35 today. So far, so good, although I want to give them some time to see what I think of them and whether they are worth a switch from the Martin Retros I've been using. One odd thing, though, and in all my years of playing guitar, I've never had this happen. When I string a guitar, I have taken to cutting the excess off the strings before putting them on the guitar. All went well until I cut the 6th string and put it on. Something must've happened to the winding when I cut the string because when I tried to tune the string to pitch, all I got was the sound of someone plucking a rubber band. Took the string off and tried again. Same deal. It sounded like a cheap bass. I've never had that experience. I had an extra set of Sunbeams so I took the 6th string from that set. I strung it up and then cut it. Sounded just fine. It warns you on the package not to cut the string ends until you tune them. These are round core strings. The ends of the wound strings are compressed so the windings can't separate while you tune the guitar. If you cut them before you wind them on the stringpost, nine time out of 10 you will destroy that string. Unlike a hex core string the windings do not bite into the core string. That is the reason the strings are so flexible. Quote Link to comment Share on other sites More sharing options...
Brucebubs Posted December 10, 2021 Share Posted December 10, 2021 56 minutes ago, j45nick said: It warns you on the package not to cut the string ends until you tune them. These are round core strings. The ends of the wound strings are compressed so the windings can't separate while you tune the guitar. If you cut them before you wind them on the stringpost, nine time out of 10 you will destroy that string. Unlike a hex core string the windings do not bite into the core string. That is the reason the strings are so flexible. 1 Quote Link to comment Share on other sites More sharing options...
62burst Posted December 11, 2021 Share Posted December 11, 2021 2 hours ago, dhanners623 said: . . . Something must've happened to the winding when I cut the string because when I tried to tune the string to pitch, all I got was the sound of someone plucking a rubber band. Took the string off and tried again. Same deal. It sounded like a cheap bass. I've never had that experience. You've just illustrated a major disadvantage of using round core strings. The advantage of extending the string one tuner post further from the post where the string will be installed, and cutting there, is that you don't end up with mess of excess string windings that resemble a honey dripper. The string ends also don't whip around the headstock while tuning up. And if you tear the pack apart instead of opening the pack on the edge (who does that?) and removing the strings, you'd never see their secret hidden warnings, err... instructions. DR Strings really needs to put that info in a place where you can't miss it. The photo on the pack shows you can put a 90° kink on the wound string, but you still end up with the string whipping around as it goes up to tune. And as BoSoxBiker mentioned, the longevity of Sunbeams is not exactly their strong suit. Only Martin SP's go away quicker, in my experience. Quote Link to comment Share on other sites More sharing options...
dhanners623 Posted December 11, 2021 Share Posted December 11, 2021 I didn't read the inside of the box. I am generally opposed to guitar strings that require an instruction sheet. Lesson learned. 1 1 Quote Link to comment Share on other sites More sharing options...
j45nick Posted December 11, 2021 Share Posted December 11, 2021 54 minutes ago, 62burst said: You've just illustrated a major disadvantage of using round core strings. The advantage of extending the string one tuner post further from the post where the string will be installed, and cutting there, is that you don't end up with mess of excess string windings that resemble a honey dripper. The string ends also don't whip around the headstock while tuning up. And if you tear the pack apart instead of opening the pack on the edge (who does that?) and removing the strings, you'd never see their secret hidden warnings, err... instructions. DR Strings really needs to put that info in a place where you can't miss it. The photo on the pack shows you can put a 90° kink on the wound string, but you still end up with the string whipping around as it goes up to tune. And as BoSoxBiker mentioned, the longevity of Sunbeams is not exactly their strong suit. Only Martin SP's go away quicker, in my experience. My experience with the longevity of Sunbeams is the exact opposite. I just replaced a set on one of my 1950 J-45s after two years. They still sounded pretty good to me. Not like new, but good. Very thumpy after the original brightness goes away after about 3-4 months. Some people think they are too bright to start with. I have them on three other Gibson flat tops right now, with strings of various ages and guitars that are in various tunings. I use them in large part because of their longevity. I don't know how you wind strings when you tune, but I have none of the problems you are talking about. When you open either end of a box of Sunbeams, there is a big note on the flap you pull out that says "prevent dead strings", and points to the more detailed instructions on the inside of the box. It ain't rocket science. 1 Quote Link to comment Share on other sites More sharing options...
Brucebubs Posted December 11, 2021 Share Posted December 11, 2021 1 hour ago, 62burst said: You've just illustrated a major disadvantage of using round core strings. The advantage of extending the string one tuner post further from the post where the string will be installed, and cutting there, is that you don't end up with mess of excess string windings that resemble a honey dripper. The string ends also don't whip around the headstock while tuning up. And if you tear the pack apart instead of opening the pack on the edge (who does that?) and removing the strings, you'd never see their secret hidden warnings, err... instructions. DR Strings really needs to put that info in a place where you can't miss it. The photo on the pack shows you can put a 90° kink on the wound string, but you still end up with the string whipping around as it goes up to tune. And as BoSoxBiker mentioned, the longevity of Sunbeams is not exactly their strong suit. Only Martin SP's go away quicker, in my experience. You've just illustrated one of the pitfalls of cutting strings before installing them - an absolutely unnecessarily step - install them long - in the tuner hole - pull back some - wind all down (no over/under needed) - trim off excess when string has tension. These pictures are $39.99 Martin Titanium round-cores I put on my IBG Hummingbird last week. Quote Link to comment Share on other sites More sharing options...
BoSoxBiker Posted December 11, 2021 Share Posted December 11, 2021 12 hours ago, 62burst said: ......... And if you tear the pack apart instead of opening the pack on the edge (who does that?) and removing the strings, you'd never see their secret hidden warnings, err... instructions. DR Strings really needs to put that info in a place where you can't miss it..... I only looked for the instructions after someone here(Jinder, IIRC) wrote about the hazards of round-core strings. I bet I had used them at least 1/2 dozen times by then. Quote Link to comment Share on other sites More sharing options...
BoSoxBiker Posted December 11, 2021 Share Posted December 11, 2021 11 hours ago, j45nick said: My experience with the longevity of Sunbeams is the exact opposite. I just replaced a set on one of my 1950 J-45s after two years. They still sounded pretty good to me. Not like new, but good. Very thumpy after the original brightness goes away after about 3-4 months. Some people think they are too bright to start with. I have them on three other Gibson flat tops right now, with strings of various ages and guitars that are in various tunings. I use them in large part because of their longevity.................... Hmmm - South Florida. Well, that blows my theory to Smithereens. I figured it was humidity getting to mine. All brands are short lifers for me. Could be anything from newer guitars to lower setups reducing room for natural string oscillation. Quote Link to comment Share on other sites More sharing options...
BoSoxBiker Posted December 11, 2021 Share Posted December 11, 2021 (edited) 10 hours ago, Brucebubs said: You've just illustrated one of the pitfalls of cutting strings before installing them - an absolutely unnecessarily step - install them long - in the tuner hole - pull back some - wind all down (no over/under needed) - trim off excess when string has tension. These pictures are $39.99 Martin Titanium round-cores I put on my IBG Hummingbird last week. Man, modern day photography. My digital camera is 2004. I couldn't take a shot like this even if I had $3k glass (lenses). Please don't tell me these were done with a phone. If it was, I'm caving in and punting. Edit (submitted too soon) Do you do that winding process with all strings or just the Titaniums? I've been curious to try it with others. Edited December 11, 2021 by BoSoxBiker Quote Link to comment Share on other sites More sharing options...
62burst Posted December 11, 2021 Share Posted December 11, 2021 42 minutes ago, BoSoxBiker said: Hmmm - South Florida. Well, that blows my theory to Smithereens. I figured it was humidity getting to mine. All brands are short lifers for me. Could be anything from newer guitars to lower setups reducing room for natural string oscillation. I just changed strings on the maple AJ- the Sunbeams that were on it were dead already. . . in only four and a half years- imagine that? 😄. All strings are pretty much short-lived compared to Elixirs, though. Personally, the Elixirs (and I'm not critical of string feel) main appeal is the reduced string noise if you move the fretting hand up and down the neck at a rate that could be described as "less than a leisurely". Their longevity is a good thing if every time a new set of strings is wound up to tension, the string's ball ends come up into the bridge plate, and just a little galling occurs there every time. Bridge plate wear is cumulative. 38 minutes ago, BoSoxBiker said: Man, modern day photography. My digital camera is 2004. I couldn't take a shot like this even if I had $3k glass (lenses). Please don't tell me these were done with a phone. If it was, I'm caving in and punting. Edit (submitted too soon) Do you do that winding process with all strings or just the Titaniums? I've been curious to try it with others. That is some fine photography there, Brucebubs. I take it that with a little experience and dexterity, there is not a problem with the B and high E holding without one wrap above where the string passes through the hole (?) And how do you like the Titaniums? Quote Link to comment Share on other sites More sharing options...
dhanners623 Posted December 11, 2021 Share Posted December 11, 2021 Never underestimate the role of your own body chemistry in string life. Fortunately, whatever acids my skin produces doesn't seem to impact strings that much. I have a buddy who makes me cringe when he asks to play my guitar; whatever acids his skin secretes ages strings after only a few minutes' playing. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.