acme97 Posted September 5, 2018 Share Posted September 5, 2018 Hi there, Did Gibson ever use decals instead of inlay on acoustics? To me this looks like decal on a 2000 J-185. Same thing for the crown. I've strummed it, and it sure walks and talks like a Gibson, and the serial number checks out. Link to comment Share on other sites More sharing options...
acme97 Posted September 5, 2018 Author Share Posted September 5, 2018 Did you try to peal it off. Looks like inlay to me. Nope...but what I see a distinct line around both the logo and crown. Never seen anything like that, like it's an "inlay" decal. I could be totally wrong but if it's some kind of masking line or something that's a new one on me. Don't want to try and peel anything because if there's issues it's going back. Link to comment Share on other sites More sharing options...
E-minor7 Posted September 5, 2018 Share Posted September 5, 2018 Did Gibson ever use decals instead of inlay on acoustics? To me this looks like decal on a 2000 J-185. If that ain't a close-up. . But no, no decal. Link to comment Share on other sites More sharing options...
acme97 Posted September 5, 2018 Author Share Posted September 5, 2018 Then what IS that? Any other Gibson I have with inlay doesn't have a uniform outline like that. In the original post, you can see it on the bottom left corner of the crown as well. Link to comment Share on other sites More sharing options...
E-minor7 Posted September 5, 2018 Share Posted September 5, 2018 Then what IS that? Any other Gibson I have with inlay doesn't have a uniform outline like that. In the original post, you can see it on the bottom left corner of the crown as well. Isn't it the border between the MOP-block and the headstock-wood seen through the black coat of paint. Link to comment Share on other sites More sharing options...
acme97 Posted September 5, 2018 Author Share Posted September 5, 2018 Isn't it the border between the MOP-block and the headstock-wood seen through the black coat of paint. well I've looked closely at all my MOP inlay Gibsons...and again, I don't have a single other example of an outline like this. It is indeed under the finish, as pictured. Now, sometimes MOP inlay has that issue where inlay meets the wood, but I know what that looks like and this is not that. However, none of you are putting any red flags up and if anyone can spot a fake or knows of a variation I do not...I'm sure it would be on these boards. Link to comment Share on other sites More sharing options...
SirNed Posted September 5, 2018 Share Posted September 5, 2018 It looks like an inlay to me. But it does looks like a masking line. Either that or a huge amount of filler between the wood and the m.o.p. Link to comment Share on other sites More sharing options...
rbpicker Posted September 5, 2018 Share Posted September 5, 2018 I’ve seen a number of AJs with a funky outline around the inlay work on the headstock. Not sure what causes it, but it seems to occur in guitars a few years old. Rb Link to comment Share on other sites More sharing options...
jchabalk Posted September 5, 2018 Share Posted September 5, 2018 Someone else can add more accurate detail here but the way those inlays work is there's a hole cut out of the holly headstock overlay that's slightly larger than the shape of the entire inlay. The inlay is then glued in with glue that's mixed with dark (ebony or holly) sawdust to fill the space. Once dry it's sanded down to reveal the inlay material. That can result in a halo effect around the inlay. Link to comment Share on other sites More sharing options...
Murph Posted September 5, 2018 Share Posted September 5, 2018 Bizarre. Looks like a sticker to me. Link to comment Share on other sites More sharing options...
slimt Posted September 5, 2018 Share Posted September 5, 2018 Its Pearl... you wont see any pearl Decals out of Gibson.. and just about every Gibson shows the same thing.. Link to comment Share on other sites More sharing options...
OldCowboy Posted September 5, 2018 Share Posted September 5, 2018 Not unusual in older Gibsons - some F-4 mandolin logos & flower pots look like they were set with a hammer. Link to comment Share on other sites More sharing options...
BigKahune Posted September 5, 2018 Share Posted September 5, 2018 . Possibly someone did a delam repair on the inlays and didn't level them out properly. Delams were a frequent topic a few years ago. The finish can sometimes delaminate from the MOP because of the difference in heat/humidity expansion and contraction between the wood and MOP - it leaves a kind of halo effect. Can't remember whose guitar this was, but I saved the pics because it was a bad case - . . . Link to comment Share on other sites More sharing options...
62burst Posted September 5, 2018 Share Posted September 5, 2018 Someone else can add more accurate detail here but the way those inlays work is there's a hole cut out of the holly headstock overlay that's slightly larger than the shape of the entire inlay. The inlay is then glued in with glue that's mixed with dark (ebony or holly) sawdust to fill the space. Once dry it's sanded down to reveal the inlay material. That can result in a halo effect around the inlay. That’s about the best description of the process I’ve seen. Gibson did mention that they’ve done something, maybe with a laser cutting?, that makes the need for that fill to be much less nowadays. Link to comment Share on other sites More sharing options...
62burst Posted September 5, 2018 Share Posted September 5, 2018 Delams were a frequent topic a few years ago. The finish can sometimes delaminate from the MOP because of the difference in heat/humidity expansion and contraction between the wood and MOP - it leaves a kind of halo effect. Can't remember whose guitar this was, but I saved the pics because it was a bad case - Ah yes, that was a fun topic… But it sounds like the OP is familiar with that issue that kind of makes the logo have a muddy edge to it . This sounds /looks like the black fill around the inlay. Link to comment Share on other sites More sharing options...
Jinder Posted September 5, 2018 Share Posted September 5, 2018 I had very similar on my ‘02 AJ and ‘03 SJ200. It seems to have been an issue on some early noughties Gibsons...definitely nothing you’d be bothered by after playing it for a week! Link to comment Share on other sites More sharing options...
FemmeParallell Posted September 5, 2018 Share Posted September 5, 2018 My 2012 R61 SG looks the same way, nothing to be worried about..unless, like someone mentioned, you see other "weird" things on the guitar Link to comment Share on other sites More sharing options...
acme97 Posted September 6, 2018 Author Share Posted September 6, 2018 Ah yes, that was a fun topic… But it sounds like the OP is familiar with that issue that kind of makes the logo have a muddy edge to it . This sounds /looks like the black fill around the inlay. Yes, you are correct. I am familiar with delam, and this is not that. No red flags though...as far as I gathered, the solid uniform line seen here has something to do with either the fill-in process around the pearloid, or similar process when they work on the headstock veneer. As stated, the rest of the guitar walks and talks Gibson. Feels and plays like one, with no further issues. It also passed inspection by a Gibson Authorized guy I know. SO...I now have my one example of this particular inlay in the guitar stable. Thanks all! Link to comment Share on other sites More sharing options...
Dave F Posted September 6, 2018 Share Posted September 6, 2018 Looks good to me Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.