cunningham26 Posted February 13, 2014 Share Posted February 13, 2014 Pulling up a bit in the scope of the conversation, my idea for argument is that the guitar buyer generally speaking wants to find a diamond in the rough, and that's why some MIK will always be desirable. I've played the MIC sorrento, 62 sherrie, and casinos, and some have been good and some have been ok and some have been bad, but I dont think any of them match my Peerless Sheraton because it's mine and it's unlike any other I've seen in terms of playability and finish. The chinese ones are solid, solid guitars, but as a result are just kind of blah. Hearing the mythology of MIJ and MIK guitars (not just with Epi but certainly fender as well) causes people to want to play older guitars they perceive as either sounding better or simply being different than the new one on the rack. Maybe a result of the vintage guitar market? Also since when do you buy a guitar and not want another? Quote Link to comment Share on other sites More sharing options...
bloozeguy Posted February 14, 2014 Share Posted February 14, 2014 While the overall quality control of Chinese Epiphones has improved in recent years and become much more consistent, aside from a few particular models (like the '61 reissues), the specs have clearly been changed for the worse. I recently saw a newer Joe Pass model in a store, and it was not even close to my 2001 Samick. The top had barely any arch at all, and the shape was more squared off from the graceful curves of my Samick. F-holes on many models have been widened, probably to make installation of the wiring harness easier, but they look oddly distorted to my eyes. Woods and finishes are clearly of lower quality as well, though the build quality seems pretty decent. The bottom line is --- it's all about the bottom line. The Qingdao factory was set up so that Epiphone guitars could be made less expensively --- not so they could be made better. Many of the designs have been compromised to that end, so I seriously doubt that the standard Chinese models will eclipse the Korean ones when they are apples-to-apples comparisons. The specialty models that were never made in Korea are a different story --- some of those may become more desirable to collectors as they become less available. Not doubting that you looked, but aren't a lot of the newer Joe Passes from Indonesia--which brings up the question: how about the Indonesian-made Epis? Quote Link to comment Share on other sites More sharing options...
brad1 Posted February 14, 2014 Share Posted February 14, 2014 --which brings up the question: how about the Indonesian-made Epis? I have a '97 Indonesian Epi SG Jr. that is just about as perfect as it could get. Quote Link to comment Share on other sites More sharing options...
'Scales Posted February 14, 2014 Share Posted February 14, 2014 pardon my curiosity Milod - I may be just having a 'junior moment' but why wouldn't you take $10k for an S100c? I've probably missed the point I realise.. Quote Link to comment Share on other sites More sharing options...
clarkuss Posted February 14, 2014 Author Share Posted February 14, 2014 The original point of this point was really to discuss the fate of 60s inspired models (mainly Sheraton, Casino, Riviera, Sorrento) as Epiphone start to reissue more 60s accurate models. I've played some Matsumoku and Peerless Hollobodies that were just ok... I've played amazing ones. No doubt you can find a good Chinese hollowbody and if it was a choice between something vaguley like a 60s Casino and one with more 60s specs, I know what I would go for. Quote Link to comment Share on other sites More sharing options...
cunningham26 Posted February 14, 2014 Share Posted February 14, 2014 if it was a choice between something vaguley like a 60s Casino and one with more 60s specs, I know what I would go for. But wouldn't you also admit that you'd choose one that sounded better to you over one that technically should sound better? Quote Link to comment Share on other sites More sharing options...
RobinTheHood Posted February 14, 2014 Share Posted February 14, 2014 Not doubting that you looked, but aren't a lot of the newer Joe Passes from Indonesia--which brings up the question: how about the Indonesian-made Epis? I have an Epi SG Junior as well, and it is fantastic. The frets are perfect. It took a set of 8 guage strings with super low action with no problem. Not a buzz to be heard anywhere. I also have an Indo bass made at the Cort factory. This bass is the whip! Top notch construction and finish. Bartolini MK-1 pickups & preamp, Hipshot tuners, brass nut, anodized brass bridge, solid flame maple body (no veneer) and a 5 piece neck-thru with Wenge stringers. The headstock even has an 1/8" flame maple veneer to match the body. The only issue I had with is was the nut was cut too low, so I had to shim it. It knocks the socks off of anything Epiphone has ever had to offer in the bass realm. List was $1200, out the door price was around $800 and I got it for $400 on closeout. Cant beat that! Quote Link to comment Share on other sites More sharing options...
milod Posted February 14, 2014 Share Posted February 14, 2014 Scales... "pardon my curiosity Milod - I may be just having a 'junior moment' but why wouldn't you take $10k for an S100c? I've probably missed the point I realise.." I got the Guild back when it was a US guitar in the early '70s. Honestly it's the best overall solidbody guitar I've ever hand my hands on. It works well for every kind of music I've played except for bluegrass in a bluegrass band. I've even used it for "old time" although I wouldn't recommend it. It's not the best guitar for everything. My archtop short-scales are better for most, except not in bad weather. My big flattops are better for 'Grass and most "old time." Some smaller flattops work as well or better for "cowboy" and even do some borderline jazz. But the old Guild is the guitar that's backup for anything I'd do electric, rock to country, jazz to blues, in spite of some changes in the #1 for this or that. They aren't making one like that any more. More than that, I've spent around 40 years with her - longer than with my wife and that's 39 years today. So... combine a super versatile and great sounding solidbody that's stable in exceptionally variable climate conditions along with more than a little bit of habit and... yeah, I'm not at all sure that $10,000 would take it. Although... my wife sez she won't go along with my idea to burn all my guitars when I croak. She sez they should go to a school music program. I will admit I'd be looking for the Gibson or Epi "original" of the type of the S100c if anything happened to it. m Quote Link to comment Share on other sites More sharing options...
Scott0 Posted February 14, 2014 Share Posted February 14, 2014 Happy anniversay milod! I've got Epis from CHina, Korea and Indonesia, they are all very nice and good guitars. Looking forward to adding a Japanese and American too!! Quote Link to comment Share on other sites More sharing options...
milod Posted February 14, 2014 Share Posted February 14, 2014 Thanks Scott... I think, though, it may be congrats to me and condolences to her... <grin> m Quote Link to comment Share on other sites More sharing options...
RobinTheHood Posted February 14, 2014 Share Posted February 14, 2014 Happy anniversay milod! I've got Epis from CHina, Korea and Indonesia, they are all very nice and good guitars. Looking forward to adding a Japanese and American too!! Me too! I'd have to say that the Koreans are my favorites, mostly because i've had them for a long, long time and there is a lot of sentimental attachment to them. Quality-wise, my newer Indos and Chinese are a probably a little better though. Quote Link to comment Share on other sites More sharing options...
charlie brown Posted February 14, 2014 Share Posted February 14, 2014 I don't know...I think all the Asian made Epi's are pretty sound, in quality, overall. Sure, there's always some that are better than other's, but you can say the same thing about any other mass produced guitar, by any other manufacturer. I prefer the Chinese Epi's, especially the Semi-hollow body models, now, beccause they are much closer to the original Epiphone/Gibson shapes, and spec's. There's still a few things, I'd love to see Epi do, to close the gap, entirely. But, in all honesty, that's probably "just me?!" I'm just one of those "nut cases," that would love to see totally accurate spec's, maintained, regardless of country of actual manufacture. But, they're getting there...closer, all the time. CB Quote Link to comment Share on other sites More sharing options...
'Scales Posted February 14, 2014 Share Posted February 14, 2014 cheers Milod. happy anniversary! our 20th is coming up soon -wives and guitars - when you find the right one, hold on to them Quote Link to comment Share on other sites More sharing options...
Elias Graves Posted February 15, 2014 Share Posted February 15, 2014 I've owned a Peerless Casino. One of those really cool turquoise models with factory Bigsby. The paint was nice and that's about all I can say about it. The nut was junk, the tuners were awful and the Bigsby was atrocious. Sold that thing in a few weeks' time. I'll take a modern Chinese version any day. Quote Link to comment Share on other sites More sharing options...
Ralph F Posted February 24, 2014 Share Posted February 24, 2014 I don't know anything about the politics of Korea vs China, but of the two Epis I have now, the ES-339 was made in China and the Les Paul I recently bought was made in Korea. Both fine instruments. My LP pics are on Shutterfly now. http://www.shutterfly.com/lightbox/view.sfly?fid=2ba2da0df01653ab2a944dfefaeb216b Ralph F Quote Link to comment Share on other sites More sharing options...
old mark Posted October 10, 2014 Share Posted October 10, 2014 Since my last post on this thread, I have bought a second 1990's Peerless-made Epiphone Sorrento...Now have 2, from the same year and factory and they are VERY different guitars. The second one is heavier, the neck feels different - a bit wider - and at this point I have it set up with flat wound jazz strings... I have also just bid on a 2003 Peerless made Casino...actually because the price is very good, if I can get him to throw in a used hard case, and it's exactly what I had been looking for. I do have Indonesian made Epiphones - several acoustics and a solid body Wilshire, all of which are exceptional guitars, far better IMO than their selling price suggests. I seem to have become a real Epiphone fan and supporter over the last 3 years, and I have been selling a lot of my "other" guitars in that time, including a few Gibsons. FWIW, I have seen and handled and played a lot of Epiphones from the 60's, late '70's, 90's and current models - They are much better guitars recently = VERY well built with good detailing and much improved electronics - IMO, Epiphone P90's are good as anyone's and better than most, while their humbuckers are slightly different in tone but still great. Overall, the NEWER Epiphones - maybe 2010 and newer, Chinese and Indonesian - seem to be more consistent one to the next over those coming before. Some of the Korean made Epi's might be exceptional, but I think there is more variance in them and some might not be as well made. Quote Link to comment Share on other sites More sharing options...
flyingfrets Posted October 10, 2014 Share Posted October 10, 2014 As I'd recounted in another thread, the majority of my experience was with the Korean Epiphones (Saein in particular). Was extremely partial to them because of the nearly flawless construction & consistency. This past spring, I bought a new "Iced Tea" burst Epi Les Paul Standard online. Was interested in trying the Probuckers & the Coil-split options. The asking price was impossible to turn away from, so I pulled the trigger. The seller stated that it was from the Indonesian factory. I tried not to have any expectations one way or the other & figured I'd return it if I didn't care for it, or felt it was not up to the quality of the Saeins I'd had in the past. Truthfully, it's one of the nicest Les Pauls I've ever played, never mind owned. Fit & finish are Class A, the Probuckers may not be Gibson, but they're damned nice in a band-mix (single-coil & humbucking both). The electronics are noiseless, no crackles, pops or scratchiness. Still haven't opened it up to see whether they're alpha of full-sizes because it really doesn't matter to me. For the first time, I bought an Epiphone that I have not customized, modded or tampered with in anyway. Doesn't need it. Likewise, outside of threads such as this one, I don't really give a thought to where it was made. Again, doesn't matter to me. Did I just get lucky or is this the current trend for Epiphone production? I have no way of knowing, but I'm still mightily impressed & pleased with this instrument. Of course, YMMV, but there it is... Quote Link to comment Share on other sites More sharing options...
old mark Posted October 12, 2014 Share Posted October 12, 2014 As I'd recounted in another thread, the majority of my experience was with the Korean Epiphones (Saein in particular). Was extremely partial to them because of the nearly flawless construction & consistency. This past spring, I bought a new "Iced Tea" burst Epi Les Paul Standard online. Was interested in trying the Probuckers & the Coil-split options. The asking price was impossible to turn away from, so I pulled the trigger. The seller stated that it was from the Indonesian factory. I tried not to have any expectations one way or the other & figured I'd return it if I didn't care for it, or felt it was not up to the quality of the Saeins I'd had in the past. Truthfully, it's one of the nicest Les Pauls I've ever played, never mind owned. Fit & finish are Class A, the Probuckers may not be Gibson, but they're damned nice in a band-mix (single-coil & humbucking both). The electronics are noiseless, no crackles, pops or scratchiness. Still haven't opened it up to see whether they're alpha of full-sizes because it really doesn't matter to me. For the first time, I bought an Epiphone that I have not customized, modded or tampered with in anyway. Doesn't need it. Likewise, outside of threads such as this one, I don't really give a thought to where it was made. Again, doesn't matter to me. Did I just get lucky or is this the current trend for Epiphone production? I have no way of knowing, but I'm still mightily impressed & pleased with this instrument. Of course, YMMV, but there it is... I have 5 Epi acoustics and a Wilshire all made in Indonesia - fantastic guitars, every one...I also have several Korean made '90's Epiphones and I find they are very good, but they have a lot of variations between them, far more so than the Chinese or Indonesian Epis I own....which is probably due to manufacturing techniques...but the detail and finish is exceptional on newer Epis, period. Quote Link to comment Share on other sites More sharing options...
crust Posted October 12, 2014 Share Posted October 12, 2014 the detail and finish is exceptional on newer Epis, period. you got that right Quote Link to comment Share on other sites More sharing options...
StRanger7032 Posted October 13, 2014 Share Posted October 13, 2014 I can understand the consistency being better with modern Epiphone electrics being made in their own factory in China. I don't own one, but it makes sense. I think the quality of the Korean ones depends a lot on the factory in which they were made. My '93 G-400 was made in the Samick factory in Korea, and the woodwork and finish are phenomenal. As mentioned before in this thread, the electronics and tuners were garbage and have since been replaced. My Indonesian-built Caballero is pretty poor in build quality in comparison to the old G-400. It plays great, but the finish has numerous flaws. I'm glad to hear the new Chinese ones are generally well made and accurate. Quote Link to comment Share on other sites More sharing options...
Fadedepi Posted October 15, 2014 Share Posted October 15, 2014 I just purchased an '02 Les Paul "Deluxe" made in Unsung Korea. It is the first Korean Epiphone I've owned. I must say it's of very high quality. Looks, plays and sounds incredible. Faded.... Quote Link to comment Share on other sites More sharing options...
DonCarlos Posted October 15, 2014 Share Posted October 15, 2014 I would have given a "blanket" endorsement of any Korean made guitar over Chinese, but after picking up a Chinese made Masterbilt, I am impressed indeed. The Chinese know how to make guitars and it's all about quality assurance and following the design to the letter. Bravo China Quote Link to comment Share on other sites More sharing options...
J4T5 Posted October 15, 2014 Share Posted October 15, 2014 I had a beautiful Casino Sunburst from the peerless era and it was great. But, I'm very impressed with most of the Epiphones I've ran in last few years. Great guitars tight build quality, feel great, sound great...just do a good set up and play! Quote Link to comment Share on other sites More sharing options...
TooManyNotes Posted September 13, 2021 Share Posted September 13, 2021 On 2/16/2013 at 6:25 PM, Bluemans335 said: I've owned dozens of Epi's over the years and think the Chinese are better. Epiphone's factory, new machinery and tooling, they control the whole process. Now they're turning out the guitars they've always wanted to. The workmanship is very good, and they're much more consistent overall. 1990's Koreans varied a lot, the quality of some just wasn't as good. The grover tuners that Epi's been using lately are excellent, tough and reliable, never had a problem with them. In comparison the 1990's Koreans usually had cheap generic tuners. There's no comparison between the upgraded humbuckers Epi's had the last couple years, to the cheap ones in Koreans. The electronics are better now too (many Koreans had mini-pots). What concerns me about 1990's Koreans, besides the inconsistency and spotty quality, is that 1) a lot of them have serious fret wear; the fret metal isn't made to last decades, and refret jobs are expensive, 2) many have scratches, dents, dings, gouges, chips of finish missing, etc, and 3) the claims of Koreans being better are pretty much the realm of sellers as an excuse to jack up their prices. I've seen some flagrant examples of this on eBay, for guitars that aren't half as good as the current production Chinese models. As more players find out about the high quality and reasonable prices of the new models, they'll wise up and Korean prices will fall. I think just prior to the switch to Chinese production in 2003, the Koreans improved, for whatever reason, but they're still not any better than the Chinese ones. Another plus for 2000+ production (Chinese and Korean) is that there's been so many great limited editions, far beyond the 1990's. I see Epiphone as continually improving their products, and that hasn't stopped. I think which factory the guitar was built in is the X-factor in the workmanship and end product of those '90's and 2000's Korean made Epiphones. But yes I totally agree that the current build technique improvements implemented in current China made instruments is a major factor in them being able to be made more cost effectively with higher and consistent quality. Seems they're using better fretboard material and stock pickups on those. I've been wanting to get one one of their semi-hollow body ones. I think the ones made by Peerless and Unsung will always be sought. A lot of that has to do with the word of mouth and reputation they made for themselves over the past 30 years. I have two Korean Unsung made guitars (a '98 SG and an '08 Sheraton). The Sheraton is a flawless instrument in every way possible. The only thing I'd ever change would be new pickups. But the ones in it aren't horrible (like the ones that came in the SG). I've also had Samick made Epiphones too. I have a '98 Samick made Dot. In my opinion the Unsungs are clearly higher quality and better playing/sounding. My '98 SG-G400 was an entry level model when new and has replacement pickups. It's 24 years old now and probably only worth about $300 even with the vintage Seymour Duncan pickups that are in it. I've been gigging on that guitar for almost 20 years, many weeks playing 3-4 days/nights, for an average of 4 hours a night. Original frets in her too. And I agree... with someone else's comment on here... I wish the Korean made Sheraton's were more true in shape, bouts, size etc. to their original USA made counterparts. The newer "inspired" models are almost exact. It's my experience that when it comes to future value... guitars, players and collectors are always looking for vintage guitars. Even not so good ones. I mean look at how many are now collecting those piece of junk Tiesco models made in Japan in the 60's that were sold at K-Mart? Those things are almost unplayable. Quote Link to comment Share on other sites More sharing options...
mihcmac Posted September 14, 2021 Share Posted September 14, 2021 (edited) The Gibson Qingdao factory started production in 2005 and has been gradually taking over production of Epiphone from the other Asian builders and improving quality I think. In 2020 Gibson did a reset of the Epiphone product line limiting to a fraction of models that were previously available and redesigned including the reintroduction of the Kalamazoo Headstock. I addition the asking price on several older used models (usually setneck versions) has increased, where some are exceeding the original cost. But I don't know if very many are actually selling at the higher prices. Edited September 14, 2021 by mihcmac Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.